> Thanks for pointing these out however after using regmap_irq_chip whole
> file won't be needed anymore.
That's fine.
> > > +static int max14577_i2c_probe(struct i2c_client *i2c,
> > > + const struct i2c_device_id *id)
> > > +{
> > > + struct max14577 *max14577;
> > > + struct max14577_platform_data *pdata = dev_get_platdata(&i2c->dev);
> > > + u8 reg_data;
> > > + int ret = 0;
> > > +
> > > + if (i2c->dev.of_node) {
> >
> > Can you pull this out. It looks neater as the top as:
> > struct device_node *np = i2c->dev.of_node;
>
> I am not sure if I understand you correctly. You would like to change
> this to:
> -------------------------
> static int max14577_i2c_probe(struct i2c_client *i2c,
> const struct i2c_device_id *id)
> {
> struct max14577 *max14577;
> struct max14577_platform_data *pdata =
> dev_get_platdata(&i2c->dev);
> struct device_node *np = i2c->dev.of_node;
> u8 reg_data;
> int ret = 0;
>
> if (np) {
> pdata = devm_kzalloc(&i2c->dev,
> sizeof(struct max14577_platform_data),
> GFP_KERNEL);
> -------------------------
> The variable 'np' would be used only once.
I know, but it's more in keeping with the rest of the subsystem.
> > > +
> > > + ret = mfd_add_devices(max14577->dev, -1, max14577_devs,
> > > + ARRAY_SIZE(max14577_devs), NULL, 0, NULL);
> >
> > You should be passing the irqdomain as the final parameter here.
>
> I replaced the IRQ handling with regmap_irq_chip so this would look like
> this:
> -------------------------
> ret = mfd_add_devices(max14577->dev, -1, max14577_devs,
> ARRAY_SIZE(max14577_devs), NULL, 0,
> regmap_irq_get_domain(max14577->irq_data));
> -------------------------
> Am I correct?
if regmap_irq_get_domain() returns an irqdomain, then yes.
> > > + return i2c_add_driver(&max14577_i2c_driver);
> > > +}
> > > +subsys_initcall(max14577_i2c_init);
> > > +
> > > +static void __exit max14577_i2c_exit(void)
> > > +{
> > > + i2c_del_driver(&max14577_i2c_driver);
> > > +}
> > > +module_exit(max14577_i2c_exit);
> >
> > >>>>>>>>>>>>>>>>>>>>>>
> >
> > Remove all this and replace with:
> > module_i2c_driver(max14577_i2c_driver);
>
> The subsys_initcall is needed. Marek Szyprowski replied to this here:
> http://thread.gmane.org/gmane.linux.drivers.devicetree/51903/focus=1594651
Okay, but this will need to be changed when USB Gadget starts to
support -EPROBE_DEFER
> > > +struct max14577_regulator_platform_data {
> > > + int id;
> > > + struct regulator_init_data *initdata;
> > > + struct device_node *of_node;
> >
> > Do you ever set this? What's the point of it is it's set in the device?
>
> Do you mean the whole struct max14577_regulator_platform_data or only
> some member of it (of_node?)?
Initially only the of_node. Usually MFD children are able to call back
into their parent to fetch these details. Also mfd_add_device() goes
out of its way to fill in the child's own of_node.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
