[PATCHv2 3/8] mfd: altr_a10sr: Add Altera Arria10 DevKit System Resource Chip

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>

Add support for the Altera Arria10 Development Kit System Resource
chip which is implemented using a MAX5 as a external gpio extender
with the regmap framework over a SPI bus.

Signed-off-by: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
---
v2	Remove hwmon from description.
	Change Altera to Intel in copyright header.
	Remove Copyright and Author from attribution
	Use devm_mfd_add_devices() and remove .remove()
	Fix Kconfig spacing.
---
 drivers/mfd/Kconfig              |   11 +++
 drivers/mfd/Makefile             |    2 +
 drivers/mfd/altera-a10sr.c       |  169 ++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/altera-a10sr.h |   85 +++++++++++++++++++
 4 files changed, 267 insertions(+)
 create mode 100644 drivers/mfd/altera-a10sr.c
 create mode 100644 include/linux/mfd/altera-a10sr.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 1bcf601..00ec129 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -18,6 +18,17 @@ config MFD_CS5535
 	  This is the core driver for CS5535/CS5536 MFD functions.  This is
           necessary for using the board's GPIO and MFGPT functionality.
 
+config MFD_ALTERA_A10SR
+	bool "Altera Arria10 DevKit System Resource chip"
+	depends on ARCH_SOCFPGA && SPI_MASTER=y && OF
+	select REGMAP_SPI
+	select MFD_CORE
+	help
+	  Support for the Altera Arria10 DevKit MAX5 System Resource chip
+	  using the SPI interface. This driver provides common support for
+	  accessing the external gpio extender (LEDs & buttons) and
+	  power supply alarms (hwmon).
+
 config MFD_ACT8945A
 	tristate "Active-semi ACT8945A"
 	select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 42a66e1..2ba3ba3 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -205,3 +205,5 @@ intel-soc-pmic-objs		:= intel_soc_pmic_core.o intel_soc_pmic_crc.o
 intel-soc-pmic-$(CONFIG_INTEL_PMC_IPC)	+= intel_soc_pmic_bxtwc.o
 obj-$(CONFIG_INTEL_SOC_PMIC)	+= intel-soc-pmic.o
 obj-$(CONFIG_MFD_MT6397)	+= mt6397-core.o
+
+obj-$(CONFIG_MFD_ALTERA_A10SR)	+= altera-a10sr.o
diff --git a/drivers/mfd/altera-a10sr.c b/drivers/mfd/altera-a10sr.c
new file mode 100644
index 0000000..c05aa4f
--- /dev/null
+++ b/drivers/mfd/altera-a10sr.c
@@ -0,0 +1,169 @@
+/*
+ * Copyright Intel Corporation (C) 2014-2016. All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * SPI access for Altera Arria10 MAX5 System Resource Chip
+ *
+ * Adapted from DA9052
+ */
+
+#include <linux/mfd/altera-a10sr.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/spi/spi.h>
+
+static const struct mfd_cell altr_a10sr_subdev_info[] = {
+	{
+		.name = "altr_a10sr_gpio",
+		.of_compatible = "altr,a10sr-gpio",
+	},
+};
+
+static bool altr_a10sr_reg_readable(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case ALTR_A10SR_VERSION_READ:
+	case ALTR_A10SR_LED_REG:
+	case ALTR_A10SR_PBDSW_REG:
+	case ALTR_A10SR_PBDSW_IRQ_REG:
+	case ALTR_A10SR_PWR_GOOD1_REG:
+	case ALTR_A10SR_PWR_GOOD2_REG:
+	case ALTR_A10SR_PWR_GOOD3_REG:
+	case ALTR_A10SR_FMCAB_REG:
+	case ALTR_A10SR_HPS_RST_REG:
+	case ALTR_A10SR_USB_QSPI_REG:
+	case ALTR_A10SR_SFPA_REG:
+	case ALTR_A10SR_SFPB_REG:
+	case ALTR_A10SR_I2C_M_REG:
+	case ALTR_A10SR_WARM_RST_REG:
+	case ALTR_A10SR_WR_KEY_REG:
+	case ALTR_A10SR_PMBUS_REG:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool altr_a10sr_reg_writeable(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case ALTR_A10SR_LED_REG:
+	case ALTR_A10SR_PBDSW_IRQ_REG:
+	case ALTR_A10SR_FMCAB_REG:
+	case ALTR_A10SR_HPS_RST_REG:
+	case ALTR_A10SR_USB_QSPI_REG:
+	case ALTR_A10SR_SFPA_REG:
+	case ALTR_A10SR_SFPB_REG:
+	case ALTR_A10SR_WARM_RST_REG:
+	case ALTR_A10SR_WR_KEY_REG:
+	case ALTR_A10SR_PMBUS_REG:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool altr_a10sr_reg_volatile(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case ALTR_A10SR_PBDSW_REG:
+	case ALTR_A10SR_PBDSW_IRQ_REG:
+	case ALTR_A10SR_PWR_GOOD1_REG:
+	case ALTR_A10SR_PWR_GOOD2_REG:
+	case ALTR_A10SR_PWR_GOOD3_REG:
+	case ALTR_A10SR_HPS_RST_REG:
+	case ALTR_A10SR_I2C_M_REG:
+	case ALTR_A10SR_WARM_RST_REG:
+	case ALTR_A10SR_WR_KEY_REG:
+	case ALTR_A10SR_PMBUS_REG:
+		return true;
+	default:
+		return false;
+	}
+}
+
+const struct regmap_config altr_a10sr_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.cache_type = REGCACHE_NONE,
+
+	.use_single_rw = true,
+	.read_flag_mask = 1,
+	.write_flag_mask = 0,
+
+	.max_register = ALTR_A10SR_WR_KEY_REG,
+	.readable_reg = altr_a10sr_reg_readable,
+	.writeable_reg = altr_a10sr_reg_writeable,
+	.volatile_reg = altr_a10sr_reg_volatile,
+
+};
+
+static int altr_a10sr_spi_probe(struct spi_device *spi)
+{
+	int ret;
+	struct altr_a10sr *a10sr;
+
+	a10sr = devm_kzalloc(&spi->dev, sizeof(*a10sr),
+			     GFP_KERNEL);
+	if (!a10sr)
+		return -ENOMEM;
+
+	spi->mode = SPI_MODE_3;
+	spi->bits_per_word = 8;
+	spi_setup(spi);
+
+	a10sr->dev = &spi->dev;
+
+	spi_set_drvdata(spi, a10sr);
+
+	a10sr->regmap = devm_regmap_init_spi(spi, &altr_a10sr_regmap_config);
+	if (IS_ERR(a10sr->regmap)) {
+		ret = PTR_ERR(a10sr->regmap);
+		dev_err(&spi->dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = devm_mfd_add_devices(a10sr->dev, PLATFORM_DEVID_AUTO,
+				   altr_a10sr_subdev_info,
+				   ARRAY_SIZE(altr_a10sr_subdev_info),
+				   NULL, 0, NULL);
+	if (ret)
+		dev_err(a10sr->dev, "Failed to register sub-devices: %d\n",
+			ret);
+
+	return ret;
+}
+
+static const struct of_device_id altr_a10sr_spi_of_match[] = {
+	{ .compatible = "altr,a10sr" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, altr_a10sr_spi_of_match);
+
+static struct spi_driver altr_a10sr_spi_driver = {
+	.probe = altr_a10sr_spi_probe,
+	.driver = {
+		.name = "altr_a10sr",
+		.of_match_table = of_match_ptr(altr_a10sr_spi_of_match),
+	},
+};
+
+module_spi_driver(altr_a10sr_spi_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("Altera Arria10 DevKit System Resource MFD Driver");
diff --git a/include/linux/mfd/altera-a10sr.h b/include/linux/mfd/altera-a10sr.h
new file mode 100644
index 0000000..45a5e6e
--- /dev/null
+++ b/include/linux/mfd/altera-a10sr.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright Intel Corporation (C) 2014-2016. All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Declarations for Altera Arria10 MAX5 System Resource Chip
+ *
+ * Adapted from DA9052
+ */
+
+#ifndef __MFD_ALTERA_A10SR_H
+#define __MFD_ALTERA_A10SR_H
+
+#include <linux/completion.h>
+#include <linux/list.h>
+#include <linux/mfd/core.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+/* Write registers are always on even addresses */
+#define  WRITE_REG_MASK              0xFE
+/* Odd registers are always on odd addresses */
+#define  READ_REG_MASK               0x01
+
+#define ALTR_A10SR_BITS_PER_REGISTER  8
+/*
+ * To find the correct register, we divide the input GPIO by
+ * the number of GPIO in each register. We then need to multiply
+ * by 2 because the reads are at odd addresses.
+ */
+#define ALTR_A10SR_REG_OFFSET(X)     (((X) / ALTR_A10SR_BITS_PER_REGISTER) << 1)
+#define ALTR_A10SR_REG_BIT(X)        ((X) % ALTR_A10SR_BITS_PER_REGISTER)
+#define ALTR_A10SR_REG_BIT_CHG(X, Y) ((X) << ALTR_A10SR_REG_BIT(Y))
+#define ALTR_A10SR_REG_BIT_MASK(X)   (1 << ALTR_A10SR_REG_BIT(X))
+
+/* Arria10 System Controller Register Defines */
+#define ALTR_A10SR_NOP                0x00    /* No Change */
+#define ALTR_A10SR_VERSION_READ       0x00    /* MAX5 Version Read */
+
+#define ALTR_A10SR_LED_REG            0x02    /* LED - Upper 4 bits */
+/* LED register Bit Definitions */
+#define ALTR_A10SR_LED_VALID_SHIFT        4       /* LED - Upper 4 bits valid */
+#define ALTR_A10SR_OUT_VALID_RANGE_LO     ALTR_A10SR_LED_VALID_SHIFT
+#define ALTR_A10SR_OUT_VALID_RANGE_HI     7
+
+#define ALTR_A10SR_PBDSW_REG          0x04    /* PB & DIP SW - Input only */
+#define ALTR_A10SR_PBDSW_IRQ_REG      0x06    /* PB & DIP SW Flag Clear */
+/* Pushbutton & DIP Switch Bit Definitions */
+#define ALTR_A10SR_IN_VALID_RANGE_LO      8
+#define ALTR_A10SR_IN_VALID_RANGE_HI      15
+
+#define ALTR_A10SR_PWR_GOOD1_REG      0x08    /* Power Good1 Read */
+#define ALTR_A10SR_PWR_GOOD2_REG      0x0A    /* Power Good2 Read */
+#define ALTR_A10SR_PWR_GOOD3_REG      0x0C    /* Power Good3 Read */
+#define ALTR_A10SR_FMCAB_REG          0x0E    /* FMCA/B & PCIe Pwr Enable */
+#define ALTR_A10SR_HPS_RST_REG        0x10    /* HPS Reset */
+#define ALTR_A10SR_USB_QSPI_REG       0x12    /* USB, BQSPI, FILE Reset */
+#define ALTR_A10SR_SFPA_REG           0x14    /* SFPA Control Reg */
+#define ALTR_A10SR_SFPB_REG           0x16    /* SFPB Control Reg */
+#define ALTR_A10SR_I2C_M_REG          0x18    /* I2C Master Select */
+#define ALTR_A10SR_WARM_RST_REG       0x1A    /* HPS Warm Reset */
+#define ALTR_A10SR_WR_KEY_REG         0x1C    /* HPS Warm Reset Key */
+#define ALTR_A10SR_PMBUS_REG          0x1E    /* HPS PM Bus */
+
+/**
+ * struct altr_a10sr - Altera Max5 MFD device private data structure
+ * @dev:  : this device
+ * @regmap: the regmap assigned to the parent device.
+ */
+struct altr_a10sr {
+	struct device *dev;
+	struct regmap *regmap;
+};
+
+#endif /* __MFD_ALTERA_A10SR_H */
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux