The FCP driver, can also support the FCPF variant for FDP1 compatible processing. Signed-off-by: Kieran Bingham <kieran@xxxxxxxxxxx> --- Documentation/devicetree/bindings/media/renesas,fcp.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) Cc: devicetree@xxxxxxxxxxxxxxx diff --git a/Documentation/devicetree/bindings/media/renesas,fcp.txt b/Documentation/devicetree/bindings/media/renesas,fcp.txt index 6a12960609d8..1c0718b501ef 100644 --- a/Documentation/devicetree/bindings/media/renesas,fcp.txt +++ b/Documentation/devicetree/bindings/media/renesas,fcp.txt @@ -7,11 +7,12 @@ conversion of AXI transactions in order to reduce the memory bandwidth. There are three types of FCP: FCP for Codec (FCPC), FCP for VSP (FCPV) and FCP for FDP (FCPF). Their configuration and behaviour depend on the module they -are paired with. These DT bindings currently support the FCPV only. +are paired with. These DT bindings currently support the FCPV and FCPF. - compatible: Must be one or more of the following - "renesas,r8a7795-fcpv" for R8A7795 (R-Car H3) compatible 'FCP for VSP' + - "renesas,r8a7795-fcpf" for R8A7795 (R-Car H3) compatible 'FCP for FDP' - "renesas,fcpv" for generic compatible 'FCP for VSP' When compatible with the generic version, nodes must list the -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html