From: Honghui Zhang <honghui.zhang@xxxxxxxxxxxx> This patch defines the local arbitor port IDs for mediatek SoC MT2701 and add descriptions of binding for mediatek generation one iommu and smi. Signed-off-by: Honghui Zhang <honghui.zhang@xxxxxxxxxxxx> Acked-by: Rob Herring <robh@xxxxxxxxxx> --- .../devicetree/bindings/iommu/mediatek,iommu.txt | 13 +++- .../memory-controllers/mediatek,smi-common.txt | 21 +++++- .../memory-controllers/mediatek,smi-larb.txt | 4 +- include/dt-bindings/memory/mt2701-larb-port.h | 85 ++++++++++++++++++++++ 4 files changed, 115 insertions(+), 8 deletions(-) create mode 100644 include/dt-bindings/memory/mt2701-larb-port.h diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt index cd1b1cd..53c20ca 100644 --- a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt +++ b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt @@ -1,7 +1,9 @@ * Mediatek IOMMU Architecture Implementation - Some Mediatek SOCs contain a Multimedia Memory Management Unit (M4U) which -uses the ARM Short-Descriptor translation table format for address translation. + Some Mediatek SOCs contain a Multimedia Memory Management Unit (M4U), and +this M4U have two generations of HW architecture. Generation one uses flat +pagetable, and only supports 4K size page mapping. Generation two uses the +ARM Short-Descriptor translation table format for address translation. About the M4U Hardware Block Diagram, please check below: @@ -36,7 +38,9 @@ in each larb. Take a example, There are many ports like MC, PP, VLD in the video decode local arbiter, all these ports are according to the video HW. Required properties: -- compatible : must be "mediatek,mt8173-m4u". +- compatible : must be one of the following string: + "mediatek,mt2701-m4u" for mt2701 which uses generation one m4u HW. + "mediatek,mt8173-m4u" for mt8173 which uses generation two m4u HW. - reg : m4u register base and size. - interrupts : the interrupt of m4u. - clocks : must contain one entry for each clock-names. @@ -46,7 +50,8 @@ Required properties: according to the local arbiter index, like larb0, larb1, larb2... - iommu-cells : must be 1. This is the mtk_m4u_id according to the HW. Specifies the mtk_m4u_id as defined in - dt-binding/memory/mt8173-larb-port.h. + dt-binding/memory/mt2701-larb-port.h for mt2701 and + dt-binding/memory/mt8173-larb-port.h for mt8173 Example: iommu: iommu@10205000 { diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt index 06a83ce..aa614b2 100644 --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt @@ -2,16 +2,31 @@ SMI (Smart Multimedia Interface) Common The hardware block diagram please check bindings/iommu/mediatek,iommu.txt +Mediatek SMI have two generations of HW architecture, mt8173 uses the second +generation of SMI HW while mt2701 uses the first generation HW of SMI. + +There's slight differences between the two SMI, for generation 2, the +register which control the iommu port is at each larb's register base. But +for generation 1, the register is at smi ao base(smi always on register +base). Besides that, the smi async clock should be prepared and enabled for +SMI generation 1 to transform the smi clock into emi clock domain, but that is +not needed for SMI generation 2. + Required properties: -- compatible : must be "mediatek,mt8173-smi-common" +- compatible : must be one of : + "mediatek,mt2701-smi-common" + "mediatek,mt8173-smi-common" - reg : the register and size of the SMI block. - power-domains : a phandle to the power domain of this local arbiter. - clocks : Must contain an entry for each entry in clock-names. -- clock-names : must contain 2 entries, as follows: +- clock-names : must contain 3 entries for generation 1 smi HW and 2 entries + for generation 2 smi HW as follows: - "apb" : Advanced Peripheral Bus clock, It's the clock for setting the register. - "smi" : It's the clock for transfer data and command. - They may be the same if both source clocks are the same. + They may be the same if both source clocks are the same. + - "async" : asynchronous clock, it help transform the smi clock into the emi + clock domain, this clock is only needed by generation 1 smi HW. Example: smi_common: smi@14022000 { diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt index 55ff3b7..21277a5 100644 --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt @@ -3,7 +3,9 @@ SMI (Smart Multimedia Interface) Local Arbiter The hardware block diagram please check bindings/iommu/mediatek,iommu.txt Required properties: -- compatible : must be "mediatek,mt8173-smi-larb" +- compatible : must be one of : + "mediatek,mt8173-smi-larb" + "mediatek,mt2701-smi-larb" - reg : the register and size of this local arbiter. - mediatek,smi : a phandle to the smi_common node. - power-domains : a phandle to the power domain of this local arbiter. diff --git a/include/dt-bindings/memory/mt2701-larb-port.h b/include/dt-bindings/memory/mt2701-larb-port.h new file mode 100644 index 0000000..78f6678 --- /dev/null +++ b/include/dt-bindings/memory/mt2701-larb-port.h @@ -0,0 +1,85 @@ +/* + * Copyright (c) 2015 MediaTek Inc. + * Author: Honghui Zhang <honghui.zhang@xxxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _MT2701_LARB_PORT_H_ +#define _MT2701_LARB_PORT_H_ + +/* + * Mediatek m4u generation 1 such as mt2701 has flat m4u port numbers, + * the first port's id for larb[N] would be the last port's id of larb[N - 1] + * plus one while larb[0]'s first port number is 0. The definition of + * MT2701_M4U_ID_LARBx is following HW register spec. + * But m4u generation 2 like mt8173 have different port number, it use fixed + * offset for each larb, the first port's id for larb[N] would be (N * 32). + */ +#define LARB0_PORT_OFFSET 0 +#define LARB1_PORT_OFFSET 11 +#define LARB2_PORT_OFFSET 21 +#define LARB3_PORT_OFFSET 43 + +#define MT2701_M4U_ID_LARB0(port) ((port) + LARB0_PORT_OFFSET) +#define MT2701_M4U_ID_LARB1(port) ((port) + LARB1_PORT_OFFSET) +#define MT2701_M4U_ID_LARB2(port) ((port) + LARB2_PORT_OFFSET) + +/* Port define for larb0 */ +#define MT2701_M4U_PORT_DISP_OVL_0 MT2701_M4U_ID_LARB0(0) +#define MT2701_M4U_PORT_DISP_RDMA1 MT2701_M4U_ID_LARB0(1) +#define MT2701_M4U_PORT_DISP_RDMA MT2701_M4U_ID_LARB0(2) +#define MT2701_M4U_PORT_DISP_WDMA MT2701_M4U_ID_LARB0(3) +#define MT2701_M4U_PORT_MM_CMDQ MT2701_M4U_ID_LARB0(4) +#define MT2701_M4U_PORT_MDP_RDMA MT2701_M4U_ID_LARB0(5) +#define MT2701_M4U_PORT_MDP_WDMA MT2701_M4U_ID_LARB0(6) +#define MT2701_M4U_PORT_MDP_ROTO MT2701_M4U_ID_LARB0(7) +#define MT2701_M4U_PORT_MDP_ROTCO MT2701_M4U_ID_LARB0(8) +#define MT2701_M4U_PORT_MDP_ROTVO MT2701_M4U_ID_LARB0(9) +#define MT2701_M4U_PORT_MDP_RDMA1 MT2701_M4U_ID_LARB0(10) + +/* Port define for larb1 */ +#define MT2701_M4U_PORT_VDEC_MC_EXT MT2701_M4U_ID_LARB1(0) +#define MT2701_M4U_PORT_VDEC_PP_EXT MT2701_M4U_ID_LARB1(1) +#define MT2701_M4U_PORT_VDEC_PPWRAP_EXT MT2701_M4U_ID_LARB1(2) +#define MT2701_M4U_PORT_VDEC_AVC_MV_EXT MT2701_M4U_ID_LARB1(3) +#define MT2701_M4U_PORT_VDEC_PRED_RD_EXT MT2701_M4U_ID_LARB1(4) +#define MT2701_M4U_PORT_VDEC_PRED_WR_EXT MT2701_M4U_ID_LARB1(5) +#define MT2701_M4U_PORT_VDEC_VLD_EXT MT2701_M4U_ID_LARB1(6) +#define MT2701_M4U_PORT_VDEC_VLD2_EXT MT2701_M4U_ID_LARB1(7) +#define MT2701_M4U_PORT_VDEC_TILE_EXT MT2701_M4U_ID_LARB1(8) +#define MT2701_M4U_PORT_VDEC_IMG_RESZ_EXT MT2701_M4U_ID_LARB1(9) + +/* Port define for larb2 */ +#define MT2701_M4U_PORT_VENC_RCPU MT2701_M4U_ID_LARB2(0) +#define MT2701_M4U_PORT_VENC_REC_FRM MT2701_M4U_ID_LARB2(1) +#define MT2701_M4U_PORT_VENC_BSDMA MT2701_M4U_ID_LARB2(2) +#define MT2701_M4U_PORT_JPGENC_RDMA MT2701_M4U_ID_LARB2(3) +#define MT2701_M4U_PORT_VENC_LT_RCPU MT2701_M4U_ID_LARB2(4) +#define MT2701_M4U_PORT_VENC_LT_REC_FRM MT2701_M4U_ID_LARB2(5) +#define MT2701_M4U_PORT_VENC_LT_BSDMA MT2701_M4U_ID_LARB2(6) +#define MT2701_M4U_PORT_JPGDEC_BSDMA MT2701_M4U_ID_LARB2(7) +#define MT2701_M4U_PORT_VENC_SV_COMV MT2701_M4U_ID_LARB2(8) +#define MT2701_M4U_PORT_VENC_RD_COMV MT2701_M4U_ID_LARB2(9) +#define MT2701_M4U_PORT_JPGENC_BSDMA MT2701_M4U_ID_LARB2(10) +#define MT2701_M4U_PORT_VENC_CUR_LUMA MT2701_M4U_ID_LARB2(11) +#define MT2701_M4U_PORT_VENC_CUR_CHROMA MT2701_M4U_ID_LARB2(12) +#define MT2701_M4U_PORT_VENC_REF_LUMA MT2701_M4U_ID_LARB2(13) +#define MT2701_M4U_PORT_VENC_REF_CHROMA MT2701_M4U_ID_LARB2(14) +#define MT2701_M4U_PORT_IMG_RESZ MT2701_M4U_ID_LARB2(15) +#define MT2701_M4U_PORT_VENC_LT_SV_COMV MT2701_M4U_ID_LARB2(16) +#define MT2701_M4U_PORT_VENC_LT_RD_COMV MT2701_M4U_ID_LARB2(17) +#define MT2701_M4U_PORT_VENC_LT_CUR_LUMA MT2701_M4U_ID_LARB2(18) +#define MT2701_M4U_PORT_VENC_LT_CUR_CHROMA MT2701_M4U_ID_LARB2(19) +#define MT2701_M4U_PORT_VENC_LT_REF_LUMA MT2701_M4U_ID_LARB2(20) +#define MT2701_M4U_PORT_VENC_LT_REF_CHROMA MT2701_M4U_ID_LARB2(21) +#define MT2701_M4U_PORT_JPGDEC_WDMA MT2701_M4U_ID_LARB2(22) + +#endif -- 1.8.1.1.dirty -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html