On Wed 25 May 09:06 PDT 2016, Peter Griffin wrote:
> diff --git a/drivers/dma/st_fdma.c b/drivers/dma/st_fdma.c
[..]
> +
> +static int st_fdma_alloc_chan_res(struct dma_chan *chan)
> +{
> + struct st_fdma_chan *fchan = to_st_fdma_chan(chan);
> + int ret;
> +
> + /* Create the dma pool for descriptor allocation */
> + fchan->node_pool = dma_pool_create(dev_name(&chan->dev->device),
> + fchan->fdev->dev,
> + sizeof(struct st_fdma_hw_node),
> + __alignof__(struct st_fdma_hw_node),
> + 0);
> +
> + if (!fchan->node_pool) {
> + dev_err(fchan->fdev->dev, "unable to allocate desc pool\n");
> + return -ENOMEM;
> + }
> +
> +
> + ret = rproc_boot(fchan->fdev->rproc);
> + if (ret) {
> + dev_err(fchan->fdev->dev, "rproc_boot failed\n");
rproc_boot(), rproc_fw_boot() and xp70_rproc_start() has already given
you specific error messages; drop this generic message.
Don't you want to destroy the dma_pool if this happens?
> + return ret;
> + }
> +
> + dev_dbg(fchan->fdev->dev, "alloc ch_id:%d type:%d\n",
> + fchan->vchan.chan.chan_id, fchan->cfg.type);
> +
> + return 0;
> +}
> +
[..]
> +
> +static const struct st_fdma_driverdata fdma_mpe31_stih407_11 = {
> + .name = "STiH407",
> + .id = 0,
> +};
> +
> +static const struct st_fdma_driverdata fdma_mpe31_stih407_12 = {
> + .name = "STiH407",
> + .id = 1,
> +};
> +
> +static const struct st_fdma_driverdata fdma_mpe31_stih407_13 = {
> + .name = "STiH407",
> + .id = 2,
> +};
> +
> +static const struct of_device_id st_fdma_match[] = {
> + { .compatible = "st,stih407-fdma-mpe31-11"
> + , .data = &fdma_mpe31_stih407_11 },
> + { .compatible = "st,stih407-fdma-mpe31-12"
> + , .data = &fdma_mpe31_stih407_12 },
> + { .compatible = "st,stih407-fdma-mpe31-13"
> + , .data = &fdma_mpe31_stih407_13 },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, st_fdma_match);
> +
> +static int st_fdma_parse_dt(struct platform_device *pdev,
> + const struct st_fdma_driverdata *drvdata,
> + struct st_fdma_dev *fdev)
> +{
> + struct device_node *np = pdev->dev.of_node;
> + int ret;
> +
> + if (!np)
> + goto err;
ret is left uninitialized here. Also as no error handling is done, just
return your error directly.
> +
> + ret = of_property_read_u32(np, "dma-channels", &fdev->nr_channels);
> + if (ret)
> + goto err;
> +
> + snprintf(fdev->fw_name, FW_NAME_SIZE, "fdma_%s_%d.elf",
> + drvdata->name, drvdata->id);
> +
> +err:
> + return ret;
> +}
> +#define FDMA_DMA_BUSWIDTHS (BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
> + BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
> + BIT(DMA_SLAVE_BUSWIDTH_3_BYTES) | \
> + BIT(DMA_SLAVE_BUSWIDTH_4_BYTES))
> +
> +static int st_fdma_probe(struct platform_device *pdev)
> +{
> + struct st_fdma_dev *fdev;
> + const struct of_device_id *match;
> + struct device_node *np = pdev->dev.of_node;
> + const struct st_fdma_driverdata *drvdata;
> + int ret, i;
> +
> + match = of_match_device((st_fdma_match), &pdev->dev);
> + if (!match || !match->data) {
> + dev_err(&pdev->dev, "No device match found\n");
> + return -ENODEV;
> + }
> +
> + drvdata = match->data;
Use of_device_get_match_data() instead. This also allows you to keep the
of_match_table and driverdata at the end of the file.
[..]
> +
> + fdev->rproc = xp70_rproc_alloc(pdev, fdev->fw_name);
> + if (!fdev->rproc) {
> + dev_err(&pdev->dev, "xp70_rproc_init failed\n");
All (non-development) error paths in xp70_rproc_alloc() will have
already printed a more specific error message, so no need to print
another generic on here.
> + ret = PTR_ERR(fdev->rproc);
> + goto err;
> + }
> +
Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
