On Mon, May 23, 2016 at 06:01:14PM -0700, Hoan Tran wrote: > Hi Rob, > > Thanks for your review ! > > On Mon, May 23, 2016 at 1:30 PM, Rob Herring <robh@xxxxxxxxxx> wrote: > > > > On Mon, May 16, 2016 at 09:17:25AM -0700, Hoan Tran wrote: > > > This patch adds the APM X-Gene hwmon device tree node documentation. > > > > > > Signed-off-by: Hoan Tran <hotran@xxxxxxx> > > > --- > > > .../devicetree/bindings/hwmon/apm-xgene-hwmon.txt | 14 ++++++++++++++ > > > 1 file changed, 14 insertions(+) > > > create mode 100644 Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt > > > > > > diff --git a/Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt b/Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt > > > new file mode 100644 > > > index 0000000..49a482e > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt > > > @@ -0,0 +1,14 @@ > > > +APM X-Gene hwmon driver > > > + > > > +Hwmon driver accesses sensors over the "SLIMpro" mailbox. > > > > DT bindings describe h/w, not driver data. > How about this description: "APM X-Gene SOC sensors are accessed over > the "SLIMpro" mailbox" ? > > I'm not sure this belongs in > > DT and perhaps the devices for the mailbox should be created by the > > mailbox driver. > I don't think the current mailbox supports it. Then add it. The mailbox binding is really only needed when other h/w blocks use a mailbox. As this is purely a firmware interface then the mailbox driver can create any devices it needs. The devices don't have to be in DT to be created. Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html