HI! > This patch changes the dtsi entry on omap4430 to contain > the thermal data. This data will enable the passive > cooling with CPUfreq cooling device at 100C and the > system will do a thermal shutdown at 125C. > > Cc: "Benoît Cousson" <bcousson@xxxxxxxxxxxx> > Cc: Tony Lindgren <tony@xxxxxxxxxxx> > Cc: Russell King <linux@xxxxxxxxxxxxxxxx> > Cc: linux-omap@xxxxxxxxxxxxxxx > Cc: devicetree-discuss@xxxxxxxxxxxxxxxx > Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > Cc: linux-kernel@xxxxxxxxxxxxxxx > Signed-off-by: Eduardo Valentin <eduardo.valentin@xxxxxx> > --- > arch/arm/boot/dts/omap443x.dtsi | 10 ++++++++-- > 1 file changed, 8 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi > index bcf455e..e9c97d6 100644 > --- a/arch/arm/boot/dts/omap443x.dtsi > +++ b/arch/arm/boot/dts/omap443x.dtsi > @@ -12,7 +12,7 @@ > > / { > cpus { > - cpu@0 { > + cpu0: cpu@0 { > /* OMAP443x variants OPP50-OPPNT */ > operating-points = < > /* kHz uV */ I see you also add labels to various other entries... > @@ -25,9 +25,15 @@ > }; > }; > > - bandgap { > + thermal-zones{ You may want to include space here. > + #include "omap4-cpu-thermal.dtsi" > + }; > + > + bandgap: bandgap { > reg = <0x4a002260 0x4 > 0x4a00232C 0x4>; > compatible = "ti,omap4430-bandgap"; > + > + #thermal-sensor-cells = <0>; > }; > }; -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html