On Mon, May 23, 2016 at 11:14 PM, <maitysanchayan@xxxxxxxxx> wrote: > Hello Rob, > > On 16-05-23 16:18:13, Rob Herring wrote: >> On Fri, May 20, 2016 at 03:32:05PM +0530, Sanchayan Maity wrote: >> > This adds a SoC driver to be used by Freescale Vybrid SoC's. >> > Driver utilises syscon and nvmem consumer API's to get the >> > various register values needed and expose the SoC specific >> > properties via sysfs. >> > >> > A sample output from Colibri Vybrid VF61 is below: >> > >> > root@colibri-vf:~# cd /sys/bus/soc/devices/soc0 >> > root@colibri-vf:/sys/bus/soc/devices/soc0# ls >> > family machine power revision soc_id subsystem uevent >> > root@colibri-vf:/sys/bus/soc/devices/soc0# cat family >> > Freescale Vybrid VF610 >> > root@colibri-vf:/sys/bus/soc/devices/soc0# cat machine >> > Freescale Vybrid >> > root@colibri-vf:/sys/bus/soc/devices/soc0# cat revision >> > 00000013 >> > root@colibri-vf:/sys/bus/soc/devices/soc0# cat soc_id >> > df6472a6130f29d4 >> > >> > Signed-off-by: Sanchayan Maity <maitysanchayan@xxxxxxxxx> >> > --- >> > .../bindings/arm/freescale/fsl,vf610-soc.txt | 20 +++ >> > drivers/soc/Kconfig | 1 + >> > drivers/soc/fsl/Kconfig | 10 ++ >> > drivers/soc/fsl/Makefile | 1 + >> > drivers/soc/fsl/soc-vf610.c | 198 +++++++++++++++++++++ >> > 5 files changed, 230 insertions(+) >> > create mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,vf610-soc.txt >> > create mode 100644 drivers/soc/fsl/Kconfig >> > create mode 100644 drivers/soc/fsl/soc-vf610.c >> > >> > diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-soc.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-soc.txt >> > new file mode 100644 >> > index 0000000..338905d >> > --- /dev/null >> > +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-soc.txt >> > @@ -0,0 +1,20 @@ >> > +Vybrid System-on-Chip >> > +--------------------- >> > + >> > +Required properties: >> > + >> > +- compatible: "fsl,vf610-soc" >> > +- rom-revision: phandle to the on-chip ROM node >> > +- mscm: phandle to the MSCM CPU configuration node >> > +- nvmem-cells: phandles to two OCOTP child nodes ocotp_cfg0 and ocotp_cfg1 >> > +- nvmem-cell-names: should contain string names "cfg0" and "cfg1" >> >> I still have similar concerns as the discussion on the last version. >> This version only proves that you aren't describing h/w, but rather just >> a collection of data that some driver wants. >> >> A driver can just as easily look-up all the nodes directly that these >> phandles point to. > > Agreed, that we can look up all the nodes directly that these phandles > refer to but I would still need a DT entry to bind to. While I could > bind to existing nodes like mscm cpucfg but that doesn't seem right. > > The very first approach that we had taken was to integrate this functionality > in mach-vf610.c code under mach-imx > http://www.spinics.net/lists/devicetree/msg80654.html Yes, everyone wants to move all platform devices in the kernel to a corresponding DT node. The result is often making up nodes to do this. It's the same thing with cpufreq. > and then it was recommended to migrate this to drivers/soc where we did use > phandles or direct look up via compatible strings The location in the tree is an orthogonal issue. You could move it and use of_machine_is_compatible without any DT change. The primary issue I have here is how do we bind soc_bus to DT in a consistent way. Sorry, but vybrid specific patches alone are never going to solve that issue. > http://www.spinics.net/lists/arm-kernel/msg420847.html > > and > > http://lkml.iu.edu/hypermail/linux/kernel/1506.0/03787.html > > There hasn't been a consensus since v1. I actually prefer your previous version binding soc_bus to the root bus node to this version. I think that is closer to the right direction. After all, pretty much everything is an SOC and every SOC has an SOC bus. Pretty much every SOC and board have revisions and may need to expose that revision info as well. We have to do this consistently which means having a default implementation for simple-bus that is not opt-in. Alternatively, we should just deprecate soc_bus and come up a different solution. Either way, I think we have a half implemented solution currently. Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
