Add pinctrl nodes and properties for phycore device nodes.
Signed-off-by: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts | 22 ++++++++++++++++++++++
arch/arm/boot/dts/imx27-phytec-phycore-som.dts | 16 ++++++++++++++++
2 files changed, 38 insertions(+)
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
index ad76d88..e792469 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
@@ -19,6 +19,24 @@
cs-gpios = <&gpio4 28 0>, <&gpio4 27 0>;
};
+&iomuxc {
+ imx27_phycore_rdk {
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX27_UART1_PINGRP1
+ MX27_UART1_RTSCTS_PINGRP1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX27_UART2_PINGRP1
+ MX27_UART2_RTSCTS_PINGRP1
+ >;
+ };
+ };
+};
+
&sdhci2 {
bus-width = <4>;
cd-gpios = <&gpio3 29 0>;
@@ -29,11 +47,15 @@
&uart1 {
fsl,uart-has-rtscts;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
fsl,uart-has-rtscts;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dts b/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
index 648541a..56960c7 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
@@ -135,11 +135,15 @@
&fec {
phy-reset-gpios = <&gpio3 30 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
status = "okay";
};
&i2c2 {
clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
at24@52 {
@@ -159,6 +163,18 @@
};
};
+&iomuxc {
+ imx27_phycard_s_som {
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <MX27_FEC1_PINGRP1>;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <MX27_I2C2_PINGRP1>;
+ };
+ };
+};
+
&nfc {
nand-bus-width = <8>;
nand-ecc-mode = "hw";
--
1.8.4.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
