Hi Christopher, > christopher.spinrath@xxxxxxxxxxxxxx hat am 23. Mai 2016 um 00:47 geschrieben: > > > From: Christopher Spinrath <christopher.spinrath@xxxxxxxxxxxxxx> > > The CompuLab Utilite Pro is a miniature fanless desktop pc based on > the i.MX6 Quad powered cm-fx6 module. It features two serial ports, > USB OTG, 4x USB, analog audio and S/PDIF, 2x Gb Ethernet, HDMI and > DVI ports, an on-board 32GB SSD, a mmc slot, and on-board wifi/bt. > > Add initial support for it including USB, Ethernet (both ports), sata > and HDMI support. > > Signed-off-by: Christopher Spinrath <christopher.spinrath@xxxxxxxxxxxxxx> > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/imx6q-utilite-pro.dts | 128 > ++++++++++++++++++++++++++++++++ > 2 files changed, 129 insertions(+) > create mode 100644 arch/arm/boot/dts/imx6q-utilite-pro.dts > > ... > diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts > b/arch/arm/boot/dts/imx6q-utilite-pro.dts > new file mode 100644 > index 0000000..bcd8e0d > --- /dev/null > +++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts > @@ -0,0 +1,128 @@ > +/* > + * Copyright 2016 Christopher Spinrath > + * Copyright 2013 CompuLab Ltd. > + * > + * Based on the GPLv2 licensed devicetree distributed with the vendor > + * kernel for the Utilite Pro: > + * Copyright 2013 CompuLab Ltd. > + * Author: Valentin Raevsky <valentin@xxxxxxxxxxxxxx> > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 or later at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ > + > ... > + > + pinctrl_uart2: uart2grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b0b1 > + MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b0b1 > + MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 > + MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 > + >; > + }; > + }; > +}; > + > +&pcie { > + pcie@0,0 { > + reg = <0x000000 0 0 0 0>; > + #address-cells = <3>; > + #size-cells = <2>; > + > + /* non-removable i211 ethernet card */ > + eth1: intel,i211@pcie0,0 { > + reg = <0x010000 0 0 0 0>; > + }; > + }; > +}; > + > +&uart2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart2>; > + fsl,uart-has-rtscts; this property is deprecated so please use the generic one: https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/?id=1006ed7e1b258dac3e85c9fafe9d38b6020c917f Stefan > + dma-names = "rx", "tx"; > + dmas = <&sdma 27 4 0>, <&sdma 28 4 0>; > + status = "okay"; > +}; > -- > 2.8.2 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
