On Mon, May 23, 2016 at 6:39 AM, Antony Pavlov <antonynpavlov@xxxxxxxxx> wrote: > Here is the quote from [1]: > > The unit-address must match the first address specified > in the reg property of the node. If the node has no reg property, > the @ and unit-address must be omitted and the node-name alone > differentiates the node from other nodes at the same level > > This patch adjusts MIPS dts-files and devicetree binding > documentation in accordance with [1]. > > [1] Power.org(tm) Standard for Embedded Power Architecture(tm) > Platform Requirements (ePAPR). Version 1.1 – 08 April 2011. > Chapter 2.2.1.1 Node Name Requirements FYI, you can reference "the Devicetree Spec" now: devicetree.org Acked-by: Rob Herring <robh@xxxxxxxxxx> > Signed-off-by: Antony Pavlov <antonynpavlov@xxxxxxxxx> > Cc: Ralf Baechle <ralf@xxxxxxxxxxxxxx> > Cc: Paul Burton <paul.burton@xxxxxxxxxx> > Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@xxxxxxxxxx> > Cc: Rob Herring <robh+dt@xxxxxxxxxx> > Cc: Pawel Moll <pawel.moll@xxxxxxx> > Cc: Mark Rutland <mark.rutland@xxxxxxx> > Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx> > Cc: Kumar Gala <galak@xxxxxxxxxxxxxx> > Cc: linux-mips@xxxxxxxxxxxxxx > Cc: devicetree@xxxxxxxxxxxxxxx > Cc: linux-kernel@xxxxxxxxxxxxxxx > --- > Documentation/devicetree/bindings/mips/cpu_irq.txt | 2 +- > arch/mips/boot/dts/ingenic/jz4740.dtsi | 2 +- > arch/mips/boot/dts/ralink/mt7620a.dtsi | 2 +- > arch/mips/boot/dts/ralink/rt2880.dtsi | 2 +- > arch/mips/boot/dts/ralink/rt3050.dtsi | 2 +- > arch/mips/boot/dts/ralink/rt3883.dtsi | 2 +- > arch/mips/boot/dts/xilfpga/nexys4ddr.dts | 2 +- > 7 files changed, 7 insertions(+), 7 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html