On 21/05/16 09:23, hongkun.cao@xxxxxxxxxxxx wrote:
From: "hongkun.cao" <hongkun.cao@xxxxxxxxxxxx>
When a dual-edge irq is triggered, an incorrect irq will be reported on
condition that the external signal is not stable and this incorrect irq
has been registered.
Correct the register offset.
I'm not sure what you want to say. From what I can see the without this
fix, the the wrong IRQ will be cleared and raised. Is this what you are
addressing?
If so:
Reviewed-by: Matthias Brugger <matthias.bgg@xxxxxxxxx>
Signed-off-by: hongkun.cao <hongkun.cao@xxxxxxxxxxxx>
---
drivers/pinctrl/mediatek/pinctrl-mtk-common.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
index 2bbe6f7..92ae49f 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
@@ -1255,9 +1255,10 @@ static void mtk_eint_irq_handler(struct irq_desc *desc)
const struct mtk_desc_pin *pin;
chained_irq_enter(chip, desc);
- for (eint_num = 0; eint_num < pctl->devdata->ap_num; eint_num += 32) {
+ for (eint_num = 0;
+ eint_num < pctl->devdata->ap_num;
+ eint_num += 32, reg += 4) {
status = readl(reg);
- reg += 4;
while (status) {
offset = __ffs(status);
index = eint_num + offset;
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
