Re: [PATCH v8 08/14] usb: otg: add OTG/dual-role core

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Fri, May 20, 2016 at 12:19:07PM +0300, Roger Quadros wrote:
> On 20/05/16 11:31, Roger Quadros wrote:
> > On 18/05/16 15:59, Roger Quadros wrote:
> >> Hi Peter,
> >>
> >> On 18/05/16 10:45, Peter Chen wrote:
> >>>
> >>>
> >>> On Mon, May 16, 2016 at 5:00 PM, Roger Quadros <rogerq@xxxxxx <mailto:rogerq@xxxxxx>> wrote:
> >>>
> >>>     On 13/05/16 13:03, Roger Quadros wrote:
> >>>     > It provides APIs for the following tasks
> >>>     >
> >>>     > - Registering an OTG/dual-role capable controller
> >>>     > - Registering Host and Gadget controllers to OTG core
> >>>     > - Providing inputs to and kicking the OTG state machine
> >>>     >
> >>>     > Provide a dual-role device (DRD) state machine.
> >>>     > DRD mode is a reduced functionality OTG mode. In this mode
> >>>     > we don't support SRP, HNP and dynamic role-swap.
> >>>     >
> >>>     > In DRD operation, the controller mode (Host or Peripheral)
> >>>     > is decided based on the ID pin status. Once a cable plug (Type-A
> >>>     > or Type-B) is attached the controller selects the state
> >>>     > and doesn't change till the cable in unplugged and a different
> >>>     > cable type is inserted.
> >>>     >
> >>>     > As we don't need most of the complex OTG states and OTG timers
> >>>     > we implement a lean DRD state machine in usb-otg.c.
> >>>     > The DRD state machine is only interested in 2 hardware inputs
> >>>     > 'id' and 'b_sess_vld'.
> >>>     >
> >>>     > Signed-off-by: Roger Quadros <rogerq@xxxxxx <mailto:rogerq@xxxxxx>>
> >>>     > ---
> >>>     >  drivers/usb/common/Makefile  |    2 +-
> >>>     >  drivers/usb/common/usb-otg.c | 1042 ++++++++++++++++++++++++++++++++++++++++++
> >>>     >  drivers/usb/core/Kconfig     |    4 +-
> >>>     >  include/linux/usb/gadget.h   |    2 +
> >>>     >  include/linux/usb/hcd.h      |    1 +
> >>>     >  include/linux/usb/otg-fsm.h  |    7 +
> >>>     >  include/linux/usb/otg.h      |  154 ++++++-
> >>>     >  7 files changed, 1206 insertions(+), 6 deletions(-)
> >>>     >  create mode 100644 drivers/usb/common/usb-otg.c
> >>>
> >>>
> >>>     This patch causes the following build issues when CONFIG_USB_GADGET=m, CONFIG_USB=m,
> >>>     CONFIG_USB_COMMON=m and CONFIG_USB_OTG=y
> >>>
> >>>     ERROR: "usb_otg_register_gadget" [drivers/usb/gadget/udc/udc-core.ko] undefined!
> >>>     ERROR: "usb_otg_unregister_gadget" [drivers/usb/gadget/udc/udc-core.ko] undefined!
> >>>     ERROR: "usb_otg_register_hcd" [drivers/usb/core/usbcore.ko] undefined!
> >>>     ERROR: "usb_otg_unregister_hcd" [drivers/usb/core/usbcore.ko] undefined!
> >>>     ERROR: "otg_statemachine" [drivers/usb/chipidea/ci_hdrc.ko] undefined!
> >>>     scripts/Makefile.modpost:91: recipe for target '__modpost' failed
> >>>     make[1]: *** [__modpost] Error 1
> >>>     Makefile:1141: recipe for target 'modules' failed
> >>>     make: *** [modules] Error 2
> >>>     make: *** Waiting for unfinished jobs....
> >>>
> >>>     drivers/built-in.o: In function `drd_set_state':
> >>>     usb-otg.c:(.text+0x2b4242): undefined reference to `usb_otg_state_string'
> >>>     drivers/built-in.o: In function `drd_statemachine':
> >>>     (.text+0x2b4b4c): undefined reference to `usb_otg_state_string'
> >>>     Makefile:937: recipe for target 'vmlinux' failed
> >>>
> >>>     I'll fix it up with the following diff.
> >>>
> >>>     diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
> >>>     index dca7856..16a5b55 100644
> >>>     --- a/drivers/usb/Makefile
> >>>     +++ b/drivers/usb/Makefile
> >>>     @@ -59,5 +59,6 @@ obj-$(CONFIG_USB_RENESAS_USBHS)       += renesas_usbhs/
> >>>      obj-$(CONFIG_USB_GADGET)       += gadget/
> >>>
> >>>      obj-$(CONFIG_USB_COMMON)       += common/
> >>>     +obj-$(CONFIG_USB_OTG)          += common/
> >>>
> >>>      obj-$(CONFIG_USBIP_CORE)       += usbip/
> >>>     diff --git a/drivers/usb/common/usb-otg.c b/drivers/usb/common/usb-otg.c
> >>>     index 77048aa..17e449e 100644
> >>>     --- a/drivers/usb/common/usb-otg.c
> >>>     +++ b/drivers/usb/common/usb-otg.c
> >>>     @@ -56,6 +56,30 @@ static int usb_otg_hcd_is_primary_hcd(struct usb_hcd *hcd)
> >>>             return hcd == hcd->primary_hcd;
> >>>      }
> >>>
> >>>     +static const char *otg_state_string(enum usb_otg_state state)
> >>>     +{
> >>>     +       static const char *const names[] = {
> >>>     +               [OTG_STATE_A_IDLE] = "a_idle",
> >>>     +               [OTG_STATE_A_WAIT_VRISE] = "a_wait_vrise",
> >>>     +               [OTG_STATE_A_WAIT_BCON] = "a_wait_bcon",
> >>>     +               [OTG_STATE_A_HOST] = "a_host",
> >>>     +               [OTG_STATE_A_SUSPEND] = "a_suspend",
> >>>     +               [OTG_STATE_A_PERIPHERAL] = "a_peripheral",
> >>>     +               [OTG_STATE_A_WAIT_VFALL] = "a_wait_vfall",
> >>>     +               [OTG_STATE_A_VBUS_ERR] = "a_vbus_err",
> >>>     +               [OTG_STATE_B_IDLE] = "b_idle",
> >>>     +               [OTG_STATE_B_SRP_INIT] = "b_srp_init",
> >>>     +               [OTG_STATE_B_PERIPHERAL] = "b_peripheral",
> >>>     +               [OTG_STATE_B_WAIT_ACON] = "b_wait_acon",
> >>>     +               [OTG_STATE_B_HOST] = "b_host",
> >>>     +       };
> >>>     +
> >>>     +       if (state < 0 || state >= ARRAY_SIZE(names))
> >>>     +               return "UNDEFINED";
> >>>     +
> >>>     +       return names[state];
> >>>     +}
> >>>     +
> >>>
> >>>
> >>>
> >>> From my point, make another copy for otg stuff is not a good way,
> >>> could we make folder under usb/ named otg for dedicated otg stuffs,
> >>> in that case, build otg stuffs can not depend on USB_COMMON.
> >>
> >> OK. I can try that. I'll delete otg_state_string from usb-common.c and
> >> move it into usb/otg/usb-otg.c
> >>
> >> I'll also move usb-otg-fsm.c to usb/otg/.
> > 
> > But we can't delete usb_otg_state_string() from usb-common.c. That is used at a
> > number of places whether OTG is enabled or not. 
> > 
> > One option is to make usb-common built in when otg is enabled. What do you say?
> > 
> 
> This should also get solved if we make USB_OTG tristate so that it is same as
> USB_COMMON.
> 
> However I haven't had success in making Kconfig behave like this.
> 
> USB_OTG = y if USB == y && GADGET = m
> USB_OTG = y if USB == m && GADGET = y
> 
> Is there any Kconfig trickery to get this behaviour?
> 

Unless let the USB_OTG works like USB_COMMON which is selected by GADGET
or HCD. In fact, HCD and Gadget code uses USB OTG symbol directly in
this framework, it seems like HCD and Gadget depends on OTG, but not
otherwise.

If we want OTG to depend on HCD && GADGET, we need not to use OTG symbol
at HCD and GADGET, and the OTG can use HCD and GADGET symbol directly.

-- 

Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux