mmc-hs400-enhanced-strobe is used to claim that the host can support hs400 mode with enhanced strobe introduced by emmc 5.1 spec. Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx> Acked-by: Rob Herring <robh@xxxxxxxxxx> --- Changes in v4: None Changes in v3: None Changes in v2: None Documentation/devicetree/bindings/mmc/mmc.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index ed23b9b..ecc007a 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -46,6 +46,7 @@ Optional properties: - mmc-hs200-1_2v: eMMC HS200 mode(1.2V I/O) is supported - mmc-hs400-1_8v: eMMC HS400 mode(1.8V I/O) is supported - mmc-hs400-1_2v: eMMC HS400 mode(1.2V I/O) is supported +- mmc-hs400-enhanced-strobe: eMMC HS400 enhanced strobe mode is supported - dsr: Value the card's (optional) Driver Stage Register (DSR) should be programmed with. Valid range: [0 .. 0xffff]. -- 2.3.7 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html