On 18-05-16, 18:36, Dave Gerlach wrote:
> + cpu0_opp_table: opp_table0 {
> + compatible = "operating-points-v2";
> +
> + /*
> + * The three following nodes are marked with opp-suspend
> + * because the can not be enabled simultaneously on a
> + * single SoC.
> + */
> + opp50@300000000 {
> + opp-hz = /bits/ 64 <300000000>;
> + opp-microvolt = <950000 931000 969000>;
> + opp-supported-hw = <0x06 0x0010>;
Is there any place in either of the patchsets you have sent, that details the
usage of the above two values? I mean which defines, what is 0x6 and what is
0x1 ?
--
viresh
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
