Re: [RFC v2 7/7] iio: inv_mpu6050: Expose channels from slave sensors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Wed, May 18, 2016 at 06:00:54PM +0300, Crestez Dan Leonard wrote:
> This works by copying the iio_chan_specs from the slave device and
> republishing them as if they belonged to the MPU itself. All
> read/write_raw operations are forwarded to the other driver.
> 
> The original device is still registered with linux as a normal driver
> and works normally and you can poke at it to configure stuff like sample
> rates and scaling factors.
> 
> Buffer values are read from the MPU fifo, allowing a much higher
> sampling rate.
> 
> Signed-off-by: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
> ---
>  .../devicetree/bindings/iio/imu/inv_mpu6050.txt    |  47 ++-

Please put all the binding changes in 1 separate patch. The h/w is not 
evolving...

Then I would have had the full picture when replying the to first 
change.

Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux