From: Shunli Wang <shunli.wang@xxxxxxxxxxxx> Dt-binding file about reset controller is used to provide kinds of definition, which is referenced by dts file and IC-specified reset controller driver code. Signed-off-by: Shunli Wang <shunli.wang@xxxxxxxxxxxx> Signed-off-by: James Liao <jamesjj.liao@xxxxxxxxxxxx> Tested-by: John Crispin <blogic@xxxxxxxxxxx> Acked-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> --- include/dt-bindings/reset/mt2701-resets.h | 83 +++++++++++++++++++++++++++++++ 1 file changed, 83 insertions(+) create mode 100644 include/dt-bindings/reset/mt2701-resets.h diff --git a/include/dt-bindings/reset/mt2701-resets.h b/include/dt-bindings/reset/mt2701-resets.h new file mode 100644 index 0000000..aaf0305 --- /dev/null +++ b/include/dt-bindings/reset/mt2701-resets.h @@ -0,0 +1,83 @@ +/* + * Copyright (c) 2015 MediaTek, Shunli Wang <shunli.wang@xxxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT2701 +#define _DT_BINDINGS_RESET_CONTROLLER_MT2701 + +/* INFRACFG resets */ +#define MT2701_INFRA_EMI_REG_RST 0 +#define MT2701_INFRA_DRAMC0_A0_RST 1 +#define MT2701_INFRA_FHCTL_RST 2 +#define MT2701_INFRA_APCIRQ_EINT_RST 3 +#define MT2701_INFRA_APXGPT_RST 4 +#define MT2701_INFRA_SCPSYS_RST 5 +#define MT2701_INFRA_KP_RST 6 +#define MT2701_INFRA_PMIC_WRAP_RST 7 +#define MT2701_INFRA_MIPI_RST 8 +#define MT2701_INFRA_IRRX_RST 9 +#define MT2701_INFRA_CEC_RST 10 +#define MT2701_INFRA_EMI_RST 32 +#define MT2701_INFRA_DRAMC0_RST 34 +#define MT2701_INFRA_TRNG_RST 37 +#define MT2701_INFRA_SYSIRQ_RST 38 + +/* PERICFG resets */ +#define MT2701_PERI_UART0_SW_RST 0 +#define MT2701_PERI_UART1_SW_RST 1 +#define MT2701_PERI_UART2_SW_RST 2 +#define MT2701_PERI_UART3_SW_RST 3 +#define MT2701_PERI_GCPU_SW_RST 5 +#define MT2701_PERI_BTIF_SW_RST 6 +#define MT2701_PERI_PWM_SW_RST 8 +#define MT2701_PERI_AUXADC_SW_RST 10 +#define MT2701_PERI_DMA_SW_RST 11 +#define MT2701_PERI_NFI_SW_RST 14 +#define MT2701_PERI_NLI_SW_RST 15 +#define MT2701_PERI_THERM_SW_RST 16 +#define MT2701_PERI_MSDC2_SW_RST 17 +#define MT2701_PERI_MSDC0_SW_RST 19 +#define MT2701_PERI_MSDC1_SW_RST 20 +#define MT2701_PERI_I2C0_SW_RST 22 +#define MT2701_PERI_I2C1_SW_RST 23 +#define MT2701_PERI_I2C2_SW_RST 24 +#define MT2701_PERI_I2C3_SW_RST 25 +#define MT2701_PERI_USB_SW_RST 28 +#define MT2701_PERI_ETH_SW_RST 29 +#define MT2701_PERI_SPI0_SW_RST 33 + +/* TOPRGU resets */ +#define MT2701_TOPRGU_INFRA_RST 0 +#define MT2701_TOPRGU_MM_RST 1 +#define MT2701_TOPRGU_MFG_RST 2 +#define MT2701_TOPRGU_ETHDMA_RST 3 +#define MT2701_TOPRGU_VDEC_RST 4 +#define MT2701_TOPRGU_VENC_IMG_RST 5 +#define MT2701_TOPRGU_DDRPHY_RST 6 +#define MT2701_TOPRGU_MD_RST 7 +#define MT2701_TOPRGU_INFRA_AO_RST 8 +#define MT2701_TOPRGU_CONN_RST 9 +#define MT2701_TOPRGU_APMIXED_RST 10 +#define MT2701_TOPRGU_HIFSYS_RST 11 +#define MT2701_TOPRGU_CONN_MCU_RST 12 +#define MT2701_TOPRGU_BDP_DISP_RST 13 + +/* HIFSYS resets */ +#define MT2701_HIFSYS_UHOST0_RST 3 +#define MT2701_HIFSYS_UHOST1_RST 4 +#define MT2701_HIFSYS_UPHY0_RST 21 +#define MT2701_HIFSYS_UPHY1_RST 22 +#define MT2701_HIFSYS_PCIE0_RST 24 +#define MT2701_HIFSYS_PCIE1_RST 25 +#define MT2701_HIFSYS_PCIE2_RST 26 + +#endif /* _DT_BINDINGS_RESET_CONTROLLER_MT2701 */ -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
