Re: [PATCH v10 0/8] add i2c driver supported for rk3399

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi,

On Mon, May 16, 2016 at 6:57 AM, David Wu <david.wu@xxxxxxxxxxxxxx> wrote:
> There are three points differert from others:
>  - new method to caculate i2c timings for rk3399
>  - pclk and function clk are separated at rk3399
>  - add fast-plus mode supported for rk3399
>
> David Wu (8):
>   i2c: rk3x: add documentation to fields in "struct rk3x_i2c"
>   i2c: rk3x: use struct "rk3x_i2c_calced_timings"
>   i2c: rk3x: Remove redundant rk3x_i2c_clean_ipd()
>   i2c: rk3x: Change SoC data to not use array
>   i2c: rk3x: Move spec timing data to "static const" structs
>   dt-bindings: i2c: rk3x: add support for rk3399
>   i2c: rk3x: add i2c support for rk3399 soc
>   i2c: rk3x: support fast-mode plus for rk3399
>
>  Documentation/devicetree/bindings/i2c/i2c-rk3x.txt |  16 +-
>  drivers/i2c/busses/i2c-rk3x.c                      | 498 +++++++++++++++++----
>  2 files changed, 434 insertions(+), 80 deletions(-)

I haven't put these on the scope or anything, but I have:

* Tested that my i2c busses on rk3288-veyron still seem to work OK
after these patches.

* Tested that my i2c busses on an rk3399 board seem to work after
these patches (plus device tree changes).

Thus, for the series:

Tested-by: Douglas Anderson <dianders@xxxxxxxxxxxx>

...possibly could leave off the Tested-by tag for the last in the
series since I have no Fast Mode Plus devices to test against.  ;)

-Doug
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux