On 05/12/2016 11:57 AM, Tony Lindgren wrote: > * Eduard Gavin <egavin@xxxxxxxxxxx> [160509 07:43]: >> Dear Nishanth, >> In igepV5 the LDO7 is connected to: >> VDDA_DSIPORTA - ball AA33 >> VDDA_DSIPORTC - ball AE33 >> VDDA_HDMI - ball AN25 >> LDO4 is connected to: >> VPP1 - ball AD9 > > Thanks for the info, here's an updated patch with comments and now > using 1.8V instead of the 2.0V omap5-board-common.dtsi. > > Regards, > > Tony > > 8< ----------------- > From: Tony Lindgren <tony@xxxxxxxxxxx> > Date: Mon, 9 May 2016 07:51:00 -0700 > Subject: [PATCH] ARM: dts: Fix ldo7 source for HDMI on igepv5 > > Fix ldo7 source for HDMI on igepv5. > > Suggested-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx> > Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> > > --- a/arch/arm/boot/dts/omap5-igep0050.dts > +++ b/arch/arm/boot/dts/omap5-igep0050.dts > @@ -35,6 +35,16 @@ > }; > }; > > +/* > + * LDO7 is used for HDMI: VDDA_DSIPORTA - ball AA33, VDDA_DSIPORTC - ball AE33 > + * VDDA_HDMI - ball AN25. LDO4 is: VPP1 - ball AD9. We should set ldo4_reg as 2v as well (default in omap5-board-common is 1.8v). VPP1 should be 2v to prevent efuse from being messed up. > + */ > +&ldo7_reg { > + status = "okay"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > +}; > + > &omap5_pmx_core { > i2c4_pins: pinmux_i2c4_pins { > pinctrl-single,pins = < > -- Regards, Nishanth Menon -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html