From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx> Add thermal driver for the bcm2835 SOC. Right now this driver does not set up the thermal device itself, but relies on the fact that the firmware is setting the device up correctly. Also it is currently only reading from the register-set. The driver also exposes the registers via debugfs. Martin Sperl (4): dt: bindings: add thermal device driver for bcm2835 thermal: bcm2835: add thermal driver for bcm2835 soc ARM: bcm2835: add thermal node to device-tree of bcm283x ARM: bcm2835: add thermal driver to default_config .../bindings/thermal/bcm2835-thermal.txt | 16 ++ arch/arm/boot/dts/bcm283x.dtsi | 6 + arch/arm/configs/bcm2835_defconfig | 2 + drivers/thermal/Kconfig | 5 + drivers/thermal/Makefile | 1 + drivers/thermal/bcm/Kconfig | 4 + drivers/thermal/bcm/Makefile | 1 + drivers/thermal/bcm/bcm2835_thermal.c | 205 +++++++++++++++++++++ 8 files changed, 240 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/bcm2835-thermal.txt create mode 100644 drivers/thermal/bcm/Kconfig create mode 100644 drivers/thermal/bcm/Makefile create mode 100644 drivers/thermal/bcm/bcm2835_thermal.c -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
