Re: [PATCH v2 0/3] input: rmi4: Regulator supply support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Bjorn,

On 05/10/2016 08:49 AM, Bjorn Andersson wrote:
On Mon 09 May 17:36 PDT 2016, Andrew Duggan wrote:

Hi Bjorn,

On 05/06/2016 09:40 PM, Bjorn Andersson wrote:
The first version of the regulator support patch suffered from being
implemented in the transport driver, as a work around for resource availability
racing (EPROBE_DEFER of the core driver) with the interrupt handler.

After reconsidering the solutions discussed following that I concluded that the
interrupt management is not really part of the transport, neither conceptually
or electrically. I therefor here suggest (patch 1/3) to move the interrupt
registration and handling to the core rmi driver.
My concern with moving interrupt processing to the core is that not all
transports report attn to the rmi core using an irq. The HID and SMBus
transports which are currently in development, reside a little higher in the
stack and attention is reported using different mechanisms. We moved
interrupt handling to the transport drivers so that they could handle the
differences in how attn is reported.

I suspected that to be the case.

This message has some of the previous discussion regarding interrupt
processing:
https://lkml.org/lkml/2015/11/28/123

Similarly, not all transports will need support for regulators. Implementing
both in the transport drivers avoids the EPROBE_DEFER racing and avoids
adding checks in the core to see if it needs to handle interrupts and manage
regulators.

So either we duplicate the regulator support in spi/i2c or we make them
optional in the core driver. Sounds like you prefer the prior, i.e. v1
of my patch.

Yes, after all this I think it makes sense to put regulator support in the spi/i2c transports like in your v1 patch. I essentially duplicated the irq handling code in both transports so I would be ok with duplicating regulator support too. It doesn't seem like that much code. But, if this is too much duplication we could create some sort of common file and put the common irq and regulator support functions which could be called in the transports. Similar to how rmi_2d_sensor.c defines some common functions shared between rmi_f11 and rmi_f12.


Thanks,
Andrew

Regards,
Bjorn

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux