This driver supports reset on both BCM21664 and BCM23550.
Code is being moved from arch/arm/mach-bcm/board_bcm21664.c
Signed-off-by: Chris Brand <chris.brand@xxxxxxxxxxxx>
---
drivers/power/reset/Kconfig | 10 +++++
drivers/power/reset/Makefile | 1 +
drivers/power/reset/brcm-kona-reset.c | 75 +++++++++++++++++++++++++++++++++++
3 files changed, 86 insertions(+)
create mode 100644 drivers/power/reset/brcm-kona-reset.c
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 0a6408a39c66..1a7c49f3650a 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -38,6 +38,16 @@ config POWER_RESET_AXXIA
Say Y if you have an Axxia family SoC.
+config POWER_RESET_BRCMKONA
+ bool "Broadcom Kona reset driver"
+ depends on ARM || COMPILE_TEST
+ default ARCH_BCM_MOBILE
+ help
+ This driver provides restart support for Broadcom Kona chips.
+
+ Say Y here if you have a Broadcom Kona-based board and you wish
+ to have restart support.
+
config POWER_RESET_BRCMSTB
bool "Broadcom STB reset driver"
depends on ARM || MIPS || COMPILE_TEST
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index 096fa67047f6..ddb9a5b35480 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -2,6 +2,7 @@ obj-$(CONFIG_POWER_RESET_AS3722) += as3722-poweroff.o
obj-$(CONFIG_POWER_RESET_AT91_POWEROFF) += at91-poweroff.o
obj-$(CONFIG_POWER_RESET_AT91_RESET) += at91-reset.o
obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o
+obj-$(CONFIG_POWER_RESET_BRCMKONA) += brcm-kona-reset.o
obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o
obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
diff --git a/drivers/power/reset/brcm-kona-reset.c b/drivers/power/reset/brcm-kona-reset.c
new file mode 100644
index 000000000000..d6f2070be89c
--- /dev/null
+++ b/drivers/power/reset/brcm-kona-reset.c
@@ -0,0 +1,75 @@
+/*
+ * Copyright (C) 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/reboot.h>
+
+#include <asm/mach/arch.h>
+
+#define RSTMGR_REG_WR_ACCESS_OFFSET 0
+#define RSTMGR_REG_CHIP_SOFT_RST_OFFSET 4
+
+#define RSTMGR_WR_PASSWORD 0xa5a5
+#define RSTMGR_WR_PASSWORD_SHIFT 8
+#define RSTMGR_WR_ACCESS_ENABLE 1
+
+static void __iomem *kona_reset_base;
+
+static int kona_reset_handler(struct notifier_block *this,
+ unsigned long mode, void *cmd)
+{
+ /*
+ * A soft reset is triggered by writing a 0 to bit 0 of the soft reset
+ * register. To write to that register we must first write the password
+ * and the enable bit in the write access enable register.
+ */
+ writel((RSTMGR_WR_PASSWORD << RSTMGR_WR_PASSWORD_SHIFT) |
+ RSTMGR_WR_ACCESS_ENABLE,
+ kona_reset_base + RSTMGR_REG_WR_ACCESS_OFFSET);
+ writel(0, kona_reset_base + RSTMGR_REG_CHIP_SOFT_RST_OFFSET);
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block kona_reset_nb = {
+ .notifier_call = kona_reset_handler,
+ .priority = 128,
+};
+
+static int kona_reset_probe(struct platform_device *pdev)
+{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ kona_reset_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(kona_reset_base))
+ return PTR_ERR(kona_reset_base);
+
+ return register_restart_handler(&kona_reset_nb);
+}
+
+static const struct of_device_id of_match[] = {
+ { .compatible = "brcm,bcm21664-resetmgr" },
+ {},
+};
+
+static struct platform_driver bcm_kona_reset_driver = {
+ .probe = kona_reset_probe,
+ .driver = {
+ .name = "brcm-kona-reset",
+ .of_match_table = of_match,
+ },
+};
+
+builtin_platform_driver(bcm_kona_reset_driver);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
