Re: [PATCH 6/6] pinctrl: mt8173: set GPIO16 to usb iddig mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Wed, 2016-05-11 at 13:56 +0200, Linus Walleij wrote:
> On Tue, May 10, 2016 at 10:23 AM, Chunfeng Yun
> <chunfeng.yun@xxxxxxxxxxxx> wrote:
> 
> > the default mode of GPIO16 pin is gpio, when set EINT16 to
> > IRQ_TYPE_LEVEL_HIGH, no interrupt is triggered, it can be
> > fixed when set its default mode as usb iddig.
> >
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
> 

Chunfeng, GPIO16 can be used as EINT16 mode, but the pinmux should be 0.
If you want to set its default mode to iddig, you should set it in dts.

Yours,
Hongzhou

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux