On Mon, May 02, 2016 at 03:18:50PM +0300, Roger Quadros wrote: > Let's use CONFIG_USB_OTG as a single config option to enable > USB OTG and the OTG FSM. This makes things a lot less confusing. > > Update all users of CONFIG_USB_OTG_FSM to CONFIG_USB_OTG. > > Signed-off-by: Roger Quadros <rogerq@xxxxxx> Acked-by: Peter Chen <peter.chen@xxxxxxx> > --- > Documentation/usb/chipidea.txt | 2 +- I have updated this file, so you will meet a conflict if you rebase with newest usb-next tree. > drivers/usb/chipidea/Makefile | 2 +- > drivers/usb/chipidea/ci.h | 2 +- > drivers/usb/chipidea/otg_fsm.h | 2 +- > drivers/usb/common/Makefile | 3 ++- > drivers/usb/core/Kconfig | 8 -------- > drivers/usb/phy/Kconfig | 2 +- > 7 files changed, 7 insertions(+), 14 deletions(-) > > diff --git a/Documentation/usb/chipidea.txt b/Documentation/usb/chipidea.txt > index 678741b..3b1f263 100644 > --- a/Documentation/usb/chipidea.txt > +++ b/Documentation/usb/chipidea.txt > @@ -5,7 +5,7 @@ with 2 Freescale i.MX6Q sabre SD boards. > > 1.1 How to enable OTG FSM in menuconfig > --------------------------------------- > -Select CONFIG_USB_OTG_FSM, rebuild kernel Image and modules. > +Select CONFIG_USB_OTG, rebuild kernel Image and modules. > If you want to check some internal variables for otg fsm, > mount debugfs, there are 2 files which can show otg fsm > variables and some controller registers value: > diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile > index 518e445..45aa24d 100644 > --- a/drivers/usb/chipidea/Makefile > +++ b/drivers/usb/chipidea/Makefile > @@ -3,7 +3,7 @@ obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc.o > ci_hdrc-y := core.o otg.o debug.o > ci_hdrc-$(CONFIG_USB_CHIPIDEA_UDC) += udc.o > ci_hdrc-$(CONFIG_USB_CHIPIDEA_HOST) += host.o > -ci_hdrc-$(CONFIG_USB_OTG_FSM) += otg_fsm.o > +ci_hdrc-$(CONFIG_USB_OTG) += otg_fsm.o > > # Glue/Bridge layers go here > > diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h > index c523975..1a32b8c 100644 > --- a/drivers/usb/chipidea/ci.h > +++ b/drivers/usb/chipidea/ci.h > @@ -406,7 +406,7 @@ static inline u32 hw_test_and_write(struct ci_hdrc *ci, enum ci_hw_regs reg, > */ > static inline bool ci_otg_is_fsm_mode(struct ci_hdrc *ci) > { > -#ifdef CONFIG_USB_OTG_FSM > +#ifdef CONFIG_USB_OTG > struct usb_otg_caps *otg_caps = &ci->platdata->ci_otg_caps; > > return ci->is_otg && ci->roles[CI_ROLE_HOST] && > diff --git a/drivers/usb/chipidea/otg_fsm.h b/drivers/usb/chipidea/otg_fsm.h > index 6366fe3..2d451bb 100644 > --- a/drivers/usb/chipidea/otg_fsm.h > +++ b/drivers/usb/chipidea/otg_fsm.h > @@ -64,7 +64,7 @@ > > #define TB_AIDL_BDIS (20) /* 4ms ~ 150ms, section 5.2.1 */ > > -#if IS_ENABLED(CONFIG_USB_OTG_FSM) > +#if IS_ENABLED(CONFIG_USB_OTG) > > int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci); > int ci_otg_fsm_work(struct ci_hdrc *ci); > diff --git a/drivers/usb/common/Makefile b/drivers/usb/common/Makefile > index 6bbb3ec..f8f2c88 100644 > --- a/drivers/usb/common/Makefile > +++ b/drivers/usb/common/Makefile > @@ -6,5 +6,6 @@ obj-$(CONFIG_USB_COMMON) += usb-common.o > usb-common-y += common.o > usb-common-$(CONFIG_USB_LED_TRIG) += led.o > > -obj-$(CONFIG_USB_OTG_FSM) += usb-otg-fsm.o > obj-$(CONFIG_USB_ULPI_BUS) += ulpi.o > +usbotg-y := usb-otg-fsm.o > +obj-$(CONFIG_USB_OTG) += usbotg.o > diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig > index dd28010..ae228d0 100644 > --- a/drivers/usb/core/Kconfig > +++ b/drivers/usb/core/Kconfig > @@ -75,14 +75,6 @@ config USB_OTG_BLACKLIST_HUB > and software costs by not supporting external hubs. So > are "Embedded Hosts" that don't offer OTG support. > > -config USB_OTG_FSM > - tristate "USB 2.0 OTG FSM implementation" > - depends on USB && USB_OTG > - select USB_PHY > - help > - Implements OTG Finite State Machine as specified in On-The-Go > - and Embedded Host Supplement to the USB Revision 2.0 Specification. > - > config USB_ULPI_BUS > tristate "USB ULPI PHY interface support" > depends on USB_SUPPORT > diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig > index c690474..06794e2 100644 > --- a/drivers/usb/phy/Kconfig > +++ b/drivers/usb/phy/Kconfig > @@ -20,7 +20,7 @@ config AB8500_USB > > config FSL_USB2_OTG > bool "Freescale USB OTG Transceiver Driver" > - depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM && PM > + depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG && PM > select USB_PHY > help > Enable this to support Freescale USB OTG transceiver. > -- > 2.7.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-usb" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Best Regards, Peter Chen -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html