On 05/09/2016 12:26 PM, Rob Herring wrote:
> On Thu, May 05, 2016 at 12:14:59PM -0700, Florian Fainelli wrote:
>> From: Jim Quinlan <jim2101024@xxxxxxxxx>
>>
>> This patchs adds the Device Tree bindings for the Broadcom STB PCIe root
>> complex hardware.
>>
>> Signed-off-by: Jim Quinlan <jim2101024@xxxxxxxxx>
>> Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
>> ---
>> Changes in v2:
>>
>> - rewrite the binding document almost from scratch to include many more
>> references to existing documents
>> - describe missing properties
>> - give better examples
>>
>> .../devicetree/bindings/pci/brcm,brcmstb-pcie.txt | 98 ++++++++++++++++++++++
>> 1 file changed, 98 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/pci/brcm,brcmstb-pcie.txt
>>
>> diff --git a/Documentation/devicetree/bindings/pci/brcm,brcmstb-pcie.txt b/Documentation/devicetree/bindings/pci/brcm,brcmstb-pcie.txt
>> new file mode 100644
>> index 000000000000..3682b0f0bc26
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pci/brcm,brcmstb-pcie.txt
>> @@ -0,0 +1,98 @@
>> +Broadcom STB PCIe Host Controller Device Tree Bindings
>> +
>> +This document describes the binding of the PCIe Root Complex hardware found in
>> +Broadcom Set Top Box System-on-Chips such as BCM7425 (MIPS), BCM7435 (MIPS) and
>> +BCM7445 (ARMv7).
>> +
>> +Required properties:
>> +- compatible: must be one of: "brcm,bcm7425-pcie"
>> + "brcm,bcm7435-pcie"
>> + "brcm,bcm7445-pcie"
>> +
>> +- reg: specifies the physical base address of the controller registers and
>> + its length
>> +
>> +- interrupt-parent: must be a reference (phandle) to the parent interrupt
>> + controller in the system (7038-l1-intc on MIPS, GIC on ARM/ARM64)
>> +
>> +- interrrupts: first interrupt must be the Level 1 interrupt number corresponding
>> + to the main PCIe RC interrupt, second interrupt must be the MSI interrupt
>> + See the interrupt-parent documentation for the number of cells and their meaning:
>> + MIPS: Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
>> + ARM/ARM64: Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt
>> +
>> +- interrupt-names: must be "pcie", and if present "msi"
>> +
>> +- interrupt-map: see pci.txt
>> +
>> +- interrupt-map-mask: see pci.txt
>> +
>> +- #address-cells: must be set to <3>, see pci.txt
>> +
>> +- #size-cells: must be set to <2>, see pci.txt
>> +
>> +- ranges: ranges for the PCI outbound windows, no I/O or prefetchable windows
>> + must be specified here, only non-prefetchable. 32-bits windows or 64-bits
>> + windows are allowed based on the host processor's capabilities (ARM w/ LPAE,
>> + ARM64).
>> +
>> +- #interrupt-cells: set to <1>, see pci.txt
>> +
>> +- brcm,log2-scb-sizes: log2 size of the SCB window that is mapped to PCIe space
>> + there must be exactly one value per memory controller present in the system
>> + (ranges from 1 to 3)
>> +
>> +Optional properties:
>> +
>> +- msi-controller: indicates that this is a MSI controller node (when supported)
>> +
>> +- clocks: phandle to the functional clock that feeds into the PCIe RC block
>> +
>> +- clock-names: the name(s) of the clocks specified in 'clocks'. Note
>> + that if the 'clocks' property is given, 'clock-names' is mandatory,
>> + and the name of the clock is expected to be "pcie".
>> +
>> +- brcm,ssc: boolean that indicates usage of spread-spectrum clocking
>
> Shouldn't this be a property of the phy? Is there no separate phy to
> control?
No, the PHY is baked into the PCIe root complex, which is why this is a
property of the root complex node since the two are conflated.
>
>> +
>> +- brcm,gen: integer that indicates desired forced generation of link: 1 => 2.5
>> + Gbps, 2 => 5.0 Gbps, 3 => 8.0 Gbps. Will override the auto-negotation if
>> + specified.
>> +
>> +- <*>-supply: see Documentation/devicetree/bindings/regulator/regulator.txt
>> +
>> +- <*>-supply-names: see Documentation/devicetree/bindings/regulator/regulator.txt
>> +
>> +Example Node:
>> +
>> +This example assumes that the top-level #address-cells = <2> and #size-cells =
>> +<2>, e.g: ARM LPAE configuration.
>> +
>> + pcie0: pcie-controller@f0460000 {
>> + reg = <0x0 0xf0460000 0x0 0x9310>;
>> + interrupts = <0x0 0x33 0x4>, <0x0 0x34, 0x4>;
> ^
> typo
Whoops, thanks.
>
>> + interrupt-names = "pcie", "msi";
>> + compatible = "brcm,bcm7445-pcie";
>> + #address-cells = <3>;
>> + #size-cells = <2>;
>> +
>> + /* Two non-prefetchable 32-bits memory space, each of 128MB
>> + * with the following mapping:
>> + * PCIe address => CPU physical address space
>> + * 0x00_0000_0000 => 0x00_C000_0000
>> + * 0x00_0800_0000 => 0x00_C800_0000
>> + */
>> + ranges = <0x02000000 0x00000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x08000000>,
>> + <0x02000000 0x00000000 0x08000000 0x00000000 0xc8000000 0x00000000 0x08000000>;
>> + #interrupt-cells = <1>;
>> + interrupt-map-mask = <0xf800 0 0 7>;
>> + interrupt-map = <0 0 0 1 &intc 47 3
>> + 0 0 0 2 &intc 48 3
>> + 0 0 0 3 &intc 49 3
>> + 0 0 0 4 &intc 50 3>;
>> + clocks = <&pcie0>;
>> + clock-names = "pcie";
>> + brcm,ssc;
>> + brcm,log2-scb-sizes = <0x1e 0x1e 0x1e>;
>> + vreg-wifi-pwr-supply-names = "vreg-wifi-pwr";
>> + vreg-wifi-pwr-supply = <&vreg-wifi-pwr>;
>
> The supply for the PCIE RC is called "vreg-wifi-pwr"? Seems a bit
> strange.
It can be called anything, this just happens to be the example, but I
can certainly drop that, since a) this is optional and b) we need to
rework that in the driver anyway.
--
Florian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
