On 09/05/16 16:52, Peter Ujfalusi wrote:
On 05/09/16 15:46, Peter Ujfalusi wrote:
On 05/09/16 15:32, Peter Ujfalusi wrote:
On 05/09/16 15:10, Peter Ujfalusi wrote:
finally I found some time to apply your patches. Sorry for the long time.
Unfortunately, it does not work. Neither on omap5evm nor on our omap5 hardware.
I get no sound on the twl6040 - just white noise (which can be controlled in
level through
amixer so it is created on the digital input side of the twl6040).
So I think your patch is missing a detail compared to my simple solution.
Did you implement anything on the audio driver side? The audio driver must
enable the clock implemented by this patch.
I did, can test it in 10 minutes or so...
might work, but linux-next is not booting on omap5-uevm :o I don't know why...
Applying Tero's alone makes the board not to boot, so something there... I can
not see anything even with low-level debugging enabled :( I can not debug it
further today, will look at this tomorrow.
The crash is in arch/arm/mach-omap2/control.c:omap_control_init()
the syscon_node_to_regmap() returns with error for the new
omap5_scm_wkup_pad_conf node. The other syscon was OK, but becasue of the
return PTR_ERR(syscon) the board will not boot...
Tero: any idea?
I can check this tomorrow at my end.
-Tero
In any case I have attached the 3 patches I have for this, including Tero's
ported to linux-next.
Patch 3 might need to be done per board probably, but this should be good for
testing.
_______________________________________________
Kernel mailing list
Kernel@xxxxxxxxxxxxxxxxx
http://pyra-handheld.com/cgi-bin/mailman/listinfo/kernel
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
