Signed-off-by: Joel Stanley <joel@xxxxxxxxx>
---
.../interrupt-controller/aspeed,ast2400-vic.txt | 24 ++++++++++++++++++++++
1 file changed, 24 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt
diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt
new file mode 100644
index 000000000000..10ed0c20ee6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt
@@ -0,0 +1,24 @@
+Aspeed Vectored Interrupt Controller
+
+These bindings are for the Aspeed AST2400 interrupt controller register layout.
+The SoC has an legacy register layout, but this driver does not support that
+mode of operation.
+
+Required properties:
+
+- compatible : should be "aspeed,ast2400-vic".
+
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 1.
+- valid-sources : bitmask of valid irq sources
+
+Example:
+
+ vic: interrupt-controller {
+ compatible = "aspeed,ast2400-new-vic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ valid-sources = < 0xffffffff 0x0007ffff>;
+ reg = <0x1e6c0080 0x80>;
+ };
--
2.8.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
