Re: [RFC v2 07/13] power: pwrseq: simple: Add support for toggling regulator

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hello Krzysztof,

On 05/05/2016 08:34 AM, Krzysztof Kozlowski wrote:
> Some devices need real hard-reset by cutting the power.  During power
> sequence turn off and on the regulator, if it is provided.
> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
> ---

[snip]

>  
>  #define to_pwrseq_simple(p) container_of(p, struct mmc_pwrseq_simple, pwrseq)
> @@ -62,6 +65,13 @@ static void mmc_pwrseq_simple_post_power_on(struct pwrseq *_pwrseq)
>  {
>  	struct mmc_pwrseq_simple *pwrseq = to_pwrseq_simple(_pwrseq);
>  
> +	if (pwrseq->ext_reg) {
> +		int err;
> +
> +		err = regulator_enable(pwrseq->ext_reg);
> +		WARN_ON_ONCE(err);
> +	}
> +

Shouldn't this be in mmc_pwrseq_simple_pre_power_on() instead?

For example, a chip may need to be powered on before attempting to
toggle its reset or power pins using some GPIO lines.

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux