On 05/05/2016 01:36 PM, Tony Lindgren wrote:
> * Nishanth Menon <nm@xxxxxx> [160504 12:52]:
>> On 05/04/2016 02:20 PM, Nishanth Menon wrote:
>> [...]
>>
>>> @@ -551,6 +590,8 @@
>>>
>>> ldo9_reg: ldo9 {
>>> /* VCC_DV_SDIO: vdds_sdcard */
>>> + vin-supply = <&vmmcsdio_fixed>;
>>> +
>>
>> There is an extra white space here, and vmmcsd_fixed is the regulator
>> to be used, looks like vmmcsdio_fixed should ideally been vwlan_fixed
>> or something.. the actual rail to LDO9_IN was called vmmc_3v3_SDIO..
>>
>> Sorry for the confusion. Unfortunately, I can not recreate the fail on
>> my board, but this sounded like the closest fix I can think of.
>
> Looks like arch/arm/boot/dts/tegra114-dalmore.dts has entries like
> this instead for the PMIC:
>
> ldo9-in-supply = <&palmas_smps9_reg>:
> ...
>
> Doing simlar changes for omap5-board-common.dtsi seems to fix the
> issues for me:
>
> LDO3: supplied by vdds_1v8_main
> LDO4: supplied by vdds_1v8_main
> ldo4: Bringing 0uV into 1800000-1800000uV
> LDO5: supplied by vsys_cobra
> LDO6: supplied by vdds_1v8_main
> LDO7: supplied by vsys_cobra
> ldo7: Bringing 0uV into 2000000-2000000uV
> LDO8: supplied by vsys_cobra
> LDO9: supplied by vmmcsd_fixed
>
> See also the patch below too, and please check I got things right
> based on your earlier patch :)
>
> Now I'm wondering if the x15 related vin-supply changes are actually all
> ignored? It seems that "vin" is only automatically configured for the
> fixed-regulator? Maybe regulator-palmas should be updated to use the
ok /me goes duh!!!! ofcourse! Sorry about not catching it..
hmm.. maybe we messed up am572x-idk as well.. I can quickly fix that
up as well
> "vin-supply" if configured to avoid confusion?
regulator-palmas using vin-supply is more sensible, but i am not sure
about the argument
for this originally was -> +Mark, Keerthy and Lakshman for feedback.
[...]
> + smps123-in-supply = <&vsys_cobra>;
> + smps45-in-supply = <&vsys_cobra>;
> + smps6-in-supply = <&vsys_cobra>;
> + smps7-in-supply = <&vsys_cobra>;
> + smps8-in-supply = <&vsys_cobra>;
> + smps9-in-supply = <&vsys_cobra>;
> + smps10_out2-in-supply = <&vsys_cobra>;
> + smps10_out1-in-supply = <&vsys_cobra>;
> + ldo1-in-supply = <&vsys_cobra>;
> + ldo2-in-supply = <&vsys_cobra>;
> + ldo3-in-supply = <&vdds_1v8_main>;
> + ldo4-in-supply = <&vdds_1v8_main>;
> + ldo5-in-supply = <&vsys_cobra>;
> + ldo6-in-supply = <&vdds_1v8_main>;
> + ldo7-in-supply = <&vsys_cobra>;
> + ldo8-in-supply = <&vsys_cobra>;
> + ldo9-in-supply = <&vmmcsd_fixed>;
> + ldousb-in-supply = <&vsys_cobra>;
ldoln is vsys_cobra as well.. I missed that.
Others look good. we should probably get this merged to fix the
regression.
> +
> regulators {
> smps123_reg: smps123 {
> /* VDD_OPP_MPU */
>
--
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
