Re: [RFC v2 01/13] usb: misc: usb3503: Clean up on driver unbind

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hello Krzysztof

Patch looks good to me, I just have a trivial comment below.

On 05/05/2016 08:34 AM, Krzysztof Kozlowski wrote:
> The driver should clean up after itself by unpreparing the clock when it
> is unbound.
> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
> ---
>  drivers/usb/misc/usb3503.c | 28 ++++++++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 
> diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c
> index b45cb77c0744..a464636675a6 100644
> --- a/drivers/usb/misc/usb3503.c
> +++ b/drivers/usb/misc/usb3503.c
> @@ -330,6 +330,19 @@ static int usb3503_i2c_probe(struct i2c_client *i2c,
>  	return usb3503_probe(hub);
>  }
>  
> +static int usb3503_i2c_remove(struct i2c_client *i2c)
> +{
> +	struct usb3503 *hub;
> +
> +	hub = i2c_get_clientdata(i2c);
> +	if (hub) {
> +		if (hub->clk)
> +			clk_disable_unprepare(hub->clk);
> +	}

I think the following is simpler and easier to read:

if (hub && hub->clk)
	clk_disable_unprepare(hub->clk);

> +
> +	return 0;
> +}
> +
>  static int usb3503_platform_probe(struct platform_device *pdev)
>  {
>  	struct usb3503 *hub;
> @@ -342,6 +355,19 @@ static int usb3503_platform_probe(struct platform_device *pdev)
>  	return usb3503_probe(hub);
>  }
>  
> +static int usb3503_platform_remove(struct platform_device *pdev)
> +{
> +	struct usb3503 *hub;
> +
> +	hub = platform_get_drvdata(pdev);
> +	if (hub) {
> +		if (hub->clk)
> +			clk_disable_unprepare(hub->clk);
> +	}
> +

Ditto.

> +	return 0;
> +}
> +
>  #ifdef CONFIG_PM_SLEEP
>  static int usb3503_i2c_suspend(struct device *dev)
>  {
> @@ -395,6 +421,7 @@ static struct i2c_driver usb3503_i2c_driver = {
>  		.of_match_table = of_match_ptr(usb3503_of_match),
>  	},
>  	.probe		= usb3503_i2c_probe,
> +	.remove		= usb3503_i2c_remove,
>  	.id_table	= usb3503_id,
>  };
>  
> @@ -404,6 +431,7 @@ static struct platform_driver usb3503_platform_driver = {
>  		.of_match_table = of_match_ptr(usb3503_of_match),
>  	},
>  	.probe		= usb3503_platform_probe,
> +	.remove		= usb3503_platform_remove,
>  };
>  
>  static int __init usb3503_init(void)
> 

Reviewed-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux