This series introduces the driver for the Kona PWM controller found in Broadcom mobile SoCs like bcm281xx and updates the device tree and the defconfig to enable use of this hardware on the bcm28155 AP board. It depends on: https://lkml.org/lkml/2013/11/14/521 Tim Kryger (5): Documentation: dt: Add kona-pwm binding pwm: kona: Introduce Kona PWM controller support ARM: dts: Declare the PWM for bcm11351 (bcm281xx) ARM: dts: Enable the PWM for bcm28155 AP board ARM: bcm_defconfig: Enable PWM and Backlight .../devicetree/bindings/pwm/bcm-kona-pwm.txt | 24 +++ arch/arm/boot/dts/bcm11351.dtsi | 8 + arch/arm/boot/dts/bcm28155-ap.dts | 4 + arch/arm/configs/bcm_defconfig | 2 + drivers/pwm/Kconfig | 10 + drivers/pwm/Makefile | 1 + drivers/pwm/pwm-bcm-kona.c | 226 +++++++++++++++++++++ 7 files changed, 275 insertions(+) create mode 100644 Documentation/devicetree/bindings/pwm/bcm-kona-pwm.txt create mode 100644 drivers/pwm/pwm-bcm-kona.c -- 1.8.0.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
