On Wed, May 04, 2016 at 01:20:36PM -0500, David Lechner wrote: > On 05/04/2016 01:10 PM, Bin Liu wrote: > >Hi, > > > >On Thu, Apr 14, 2016 at 01:35:14PM -0500, David Lechner wrote: > >>The initial use for this is for PHYs that have a mode related to USB OTG. > >>There are several SoCs (e.g. TI OMAP and DA8xx) that have a mode setting > >>in the USB PHY to override OTG VBUS and ID signals. > >> > >>Of course, the enum can be expaned in the future to include modes for > >>other types of PHYs as well. > >> > >>Suggested-by: Kishon Vijay Abraham I <kishon@xxxxxx> > >>Signed-off-by: David Lechner <david@xxxxxxxxxxxxxx> > >>--- > >> > >>v4 changes: > >> > >>* This is a new patch to avoid exporting a symbol from the phy-da8xx-usb driver. > >> > >> > >> drivers/phy/phy-core.c | 15 +++++++++++++++ > >> include/linux/phy/phy.h | 15 +++++++++++++++ > >> 2 files changed, 30 insertions(+) > >> > >>diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c > >>index e7e574d..fe0344c 100644 > >>--- a/drivers/phy/phy-core.c > >>+++ b/drivers/phy/phy-core.c > >>@@ -342,6 +342,21 @@ int phy_power_off(struct phy *phy) > >> } > >> EXPORT_SYMBOL_GPL(phy_power_off); > >> > >>+int phy_set_mode(struct phy *phy, enum phy_mode mode) > >>+{ > >>+ int ret; > >>+ > >>+ if (!phy || !phy->ops->set_mode) > >>+ return 0; > >>+ > >>+ mutex_lock(&phy->mutex); > >>+ ret = phy->ops->set_mode(phy, mode); > >>+ mutex_unlock(&phy->mutex); > >>+ > >>+ return ret; > >>+} > >>+EXPORT_SYMBOL_GPL(phy_set_mode); > > > >Sorry for my late comments, have been busy on other things. > > > >As I commented in v2, isn't it a better idea to not adding this callback > >and let the da8xx phy driver set the mode register in _probe() based on > >DT dr_mode? > > > >musb core only calls the *optional* _set_mode() during init, so I don't > >see any problem if the phy set the mode in its probe. > > > >Regards, > >-Bin. > > > > As was already discussed, the mode can be changed via sysfs as well > as during probe, so this callback is needed for that case. Ahh, it seems we have discussed this... I keep forgetting things... > > This is something I actually plan on using because the device I am > using (LEGO MINDSTORMS EV3) is not wired for OTG, so the callback is > needed to override the ID and VBUS signals when switching between > host and peripheral mode. Have you already tested this? I never tried changing mode via sysfs, but by quickly reviewing the code, I am wondering how it works. the core only calls ops->set_mode() but nothing else. To really switch the mode, the driver has to talk to the root hub, and manipulate the SESSION bit... Regards, -Bin. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html