RE: [PATCH v5 1/2] can: rcar_canfd: Add Renesas R-Car CAN FD driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Rob,

> On Thu, Apr 28, 2016 at 01:23:07PM +0100, Ramesh Shanmugasundaram wrote:
> > This patch adds support for the CAN FD controller found in Renesas
> > R-Car SoCs. The controller operates in CAN FD only mode by default.
> >
> > CAN FD mode supports both Classical CAN & CAN FD frame formats. The
> > controller supports ISO 11898-1:2015 CAN FD format only.
> >
> > This controller supports two channels and the driver can enable either
> > or both of the channels.
> >
> > Driver uses Rx FIFOs (one per channel) for reception & Common FIFOs
> > (one per channel) for transmission. Rx filter rules are configured to
> > the minimum (one per channel) and it accepts Standard, Extended, Data
> > & Remote Frame combinations.
> >
> > Note: There are few documentation errors in R-Car Gen3 Hardware User
> > Manual v0.5E with respect to CAN FD controller. They are listed below:
> >
> > 1. CAN FD interrupt numbers 29 & 30 are listed as per channel
> > interrupts. However, they are common to both channels (i.e.) they are
> > global and channel interrupts respectively.
> >
> > 2. CANFD clock is derived from PLL1. This is not documented.
> >
> > 3. CANFD clock is further divided by (1/2) within the CAN FD controller.
> > This is not documented.
> >
> > 4. The minimum value of NTSEG1 in RSCFDnCFDCmNCFG register is 2 Tq. It
> > is specified 4 Tq in the manual.
> >
> > 5. The maximum number of message RAM area the controller can use is
> > 3584 bytes. It is specified 10752 bytes in the manual.
> >
> > Signed-off-by: Ramesh Shanmugasundaram
> > <ramesh.shanmugasundaram@xxxxxxxxxxxxxx>
> > ---
> >  .../devicetree/bindings/net/can/rcar_canfd.txt     |   89 ++
> 
> What happened to my ack?

Sorry, I missed it when I updated the patch. I mentioned it in cover letter though. I will request the CAN maintainer to add it if this is accepted or otherwise I will add it to the next patch series.

---
Changes since v3:
	* Split v3 patch into two (Marc K)
	  (1) Introduce rcar_canfd.c driver in drivers/net/can/rcar dir
	  (2) Move rcar_can.c driver to new drivers/net/can/rcar dir
	* Added Acked-by Rob H for the bindings
---

Thanks,
Ramesh
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux