Lubomir Rintel <lkundrak@xxxxx> writes: > The hub and the ethernet in its port 1 are hardwired on the board. > > Compared to the adapters that can be plugged into the USB ports, this > one has no serial EEPROM to store its MAC. Nevertheless, the Raspberry Pi > has the MAC address for this adapter in its ROM, accessible from its > firmware. > > U-Boot can read out the address and set the local-mac-address property of the > node with "ethernet" alias. Let's add the node so that U-Boot can do its > business. > > Model B rev2 and Model B+ entries were verified by me, the hierarchy and > pid/vid pair for the Version 2 was provided by Peter Chen. Original > Model B is a blind shot, though very likely correct. > > Signed-off-by: Lubomir Rintel <lkundrak@xxxxx> > Acked-by: Stephen Warren <swarren@xxxxxxxxxxxxx> Tested-by: Olivier Blin <dev@xxxxxxxxx> Though, I still need the following patch for this DT patch to be useful: net/smscx5xx: use the device tree for mac address Thanks for the update Lubomir -- Olivier Blin - blino -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html