Re: [PATCH 1/3] dt-bindings: bus: Add documentation for Tegra210 ACONNECT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Fri, Apr 29, 2016 at 02:53:45PM +0100, Jon Hunter wrote:
> Add binding documentation for the Tegra ACONNECT bus that is part of the
> Audio Processing Engine (APE) on Tegra210. The ACONNECT bus is used to
> access devices within the APE subsystem. The APE is located in a
> separate power domain and so accesses made to the ACONNECT require the
> power domain to be enabled as well as some platform specific clocks.
> 
> Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx>
> ---
>  .../bindings/bus/nvidia,tegra210-aconnect.txt      | 45 ++++++++++++++++++++++
>  1 file changed, 45 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt
> 
> diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt
> new file mode 100644
> index 000000000000..e5e915f8fca7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt
> @@ -0,0 +1,45 @@
> +NVIDIA Tegra ACONNECT Bus
> +
> +The Tegra ACONNECT bus is an AXI switch which is used to connnect various
> +components inside the Audio Processing Engine (APE). All CPU accesses to
> +the APE subsystem go through the ACONNECT via an APB to AXI wrapper.
> +
> +Required properties:
> +- compatible: Must be "nvidia,tegra210-aconnect".
> +- clocks: Must contain the entries for the APE clock (TEGRA210_CLK_APE),
> +  and APE interface clock (TEGRA210_CLK_APB2APE).
> +- clock-names: Must contain the names "ape" and "apb2ape" for the corresponding
> +  'clocks' entries.
> +- power-domains: Must contain a phandle that points to the audio powergate
> +  (namely 'aud') for Tegra210.
> +- #address-cells: The number of cells used to represent physical base addresses
> +  in the host1x address space. Should be 2.
> +- #size-cells: The number of cells used to represent the size of an address
> +  range in the host1x address space. Should be 2.

Do you really need >4GB of child addresses?

> +- ranges: 1:1 mapping of the aconnect address space to the CPU address space.

Why 1:1 for 256KB of address space?

> +
> +All devices accessed via the ACONNNECT are described by child-nodes.
> +
> +Example:
> +
> +	aconnect@702c0000 {
> +		compatible = "nvidia,tegra210-aconnect";
> +		clocks = <&tegra_car TEGRA210_CLK_APE>,
> +			 <&tegra_car TEGRA210_CLK_APB2APE>;
> +		clock-names = "ape", "apb2ape";
> +		power-domains = <&pd_audio>;
> +
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges = <0x0 0x702c0000 0x0 0x702c0000 0x0 0x00040000>;
> +
> +		status = "disabled";
> +
> +		child1 {
> +			...
> +		};
> +
> +		child2 {
> +			...
> +		};
> +	};
> -- 
> 2.1.4
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux