Add a new DT property, nxp,inverted, to invert the polarity of the output. Tested on PCA9634. Signed-off-by: Anders Darander <anders@xxxxxxxxxxxxxx> --- Documentation/devicetree/bindings/leds/pca963x.txt | 1 + drivers/leds/leds-pca963x.c | 17 +++++++++++++++-- include/linux/platform_data/leds-pca963x.h | 6 ++++++ 3 files changed, 22 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/leds/pca963x.txt b/Documentation/devicetree/bindings/leds/pca963x.txt index dafbe99..68579c5 100644 --- a/Documentation/devicetree/bindings/leds/pca963x.txt +++ b/Documentation/devicetree/bindings/leds/pca963x.txt @@ -7,6 +7,7 @@ Optional properties: - nxp,totem-pole : use totem pole (push-pull) instead of open-drain (pca9632 defaults to open-drain, newer chips to totem pole) - nxp,hw-blink : use hardware blinking instead of software blinking +- nxp,inverted: invert the polarity of the generated PWM Each led is represented as a sub-node of the nxp,pca963x device. diff --git a/drivers/leds/leds-pca963x.c b/drivers/leds/leds-pca963x.c index 407eba1..41b7648 100644 --- a/drivers/leds/leds-pca963x.c +++ b/drivers/leds/leds-pca963x.c @@ -294,6 +294,12 @@ pca963x_dt_init(struct i2c_client *client, struct pca963x_chipdef *chip) else pdata->blink_type = PCA963X_SW_BLINK; + /* default to non-inverted output, unless inverted is specified */ + if (of_property_read_bool(np, "nxp,inverted")) + pdata->dir = PCA963X_INVERTED; + else + pdata->dir = PCA963X_NORMAL; + return pdata; } @@ -395,11 +401,18 @@ static int pca963x_probe(struct i2c_client *client, i2c_smbus_write_byte_data(client, PCA963X_MODE1, 0x00); if (pdata) { + u8 mode2 = i2c_smbus_read_byte_data(pca963x->chip->client, + PCA963X_MODE2); /* Configure output: open-drain or totem pole (push-pull) */ if (pdata->outdrv == PCA963X_OPEN_DRAIN) - i2c_smbus_write_byte_data(client, PCA963X_MODE2, 0x01); + mode2 |= 0x01; else - i2c_smbus_write_byte_data(client, PCA963X_MODE2, 0x05); + mode2 |= 0x05; + /* Configure direction: normal or inverted */ + if (pdata->dir == PCA963X_INVERTED) + mode2 |= 0x10; + i2c_smbus_write_byte_data(pca963x->chip->client, PCA963X_MODE2, + mode2); } return 0; diff --git a/include/linux/platform_data/leds-pca963x.h b/include/linux/platform_data/leds-pca963x.h index e731f00..54e845f 100644 --- a/include/linux/platform_data/leds-pca963x.h +++ b/include/linux/platform_data/leds-pca963x.h @@ -33,10 +33,16 @@ enum pca963x_blink_type { PCA963X_HW_BLINK, }; +enum pca963x_direction { + PCA963X_NORMAL, + PCA963X_INVERTED, +}; + struct pca963x_platform_data { struct led_platform_data leds; enum pca963x_outdrv outdrv; enum pca963x_blink_type blink_type; + enum pca963x_direction dir; }; #endif /* __LINUX_PCA963X_H*/ -- 2.8.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html