From: Carlo Caione <carlo@xxxxxxxxxxxx> Patchset to add and enable the pin controller driver on a couple of Amlogic boards with a Meson GXBB SoC. Please note that: * This patch depends on http://www.spinics.net/lists/devicetree/msg120964.html ([PATCH] ARM64: dts: amlogic: Add hiu and periphs buses). * The platform driver is still missing a lot of muxing configurations. This is because Amlogic still hasn't publicly released documentation for the GXBB. Since Kevin has already this documentation under NDA, he will integrate and complete this driver with a separate submission. Carlo Caione (2): pinctrl: amlogic: Add support for Amlogic Meson GXBB SoC ARM64: dts: amlogic: Enable pin controller on GXBB-based platforms .../devicetree/bindings/pinctrl/meson,pinctrl.txt | 2 + arch/arm64/Kconfig.platforms | 2 + .../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 13 + arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 2 + .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 3 + arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 41 ++ drivers/pinctrl/meson/Makefile | 2 +- drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 432 +++++++++++++++++++++ drivers/pinctrl/meson/pinctrl-meson.c | 8 + drivers/pinctrl/meson/pinctrl-meson.h | 2 + include/dt-bindings/gpio/meson-gxbb-gpio.h | 154 ++++++++ 11 files changed, 660 insertions(+), 1 deletion(-) create mode 100644 drivers/pinctrl/meson/pinctrl-meson-gxbb.c create mode 100644 include/dt-bindings/gpio/meson-gxbb-gpio.h -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
