Re: [PATCH v4 12/15] usb: phy: msm: Add support for secondary PHY control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Mark,

On Fri, 2013-11-15 at 16:42 +0000, Mark Rutland wrote: 
> On Tue, Nov 12, 2013 at 02:51:47PM +0000, Ivan T. Ivanov wrote:
> > From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
> > 
> > Allow support to use 2nd HSPHY with USB2 Core.
> > Some platforms may have configuration to allow USB controller
> > work with any of the two HSPHYs present. By default driver
> > configures USB core to use primary HSPHY. Add support to allow
> > user select 2nd HSPHY using DT parameter.
> > 
> > Signed-off-by: Ivan T. Ivanov <iivanov@xxxxxxxxxx>
> > Cc: Manu Gautam <mgautam@xxxxxxxxxxxxxx>
> > Cc: devicetree@xxxxxxxxxxxxxxx
> > ---
> >  .../devicetree/bindings/usb/msm-hsusb.txt          |    6 +++++
> >  drivers/usb/phy/phy-msm-usb.c                      |   24 ++++++++++++++++++--
> >  include/linux/usb/msm_hsusb.h                      |    1 +
> >  include/linux/usb/msm_hsusb_hw.h                   |    1 +
> >  4 files changed, 30 insertions(+), 2 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
> > index 3f21204..d105ba9 100644
> > --- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt
> > +++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
> > @@ -72,6 +72,12 @@ Optional properties:
> >  - qcom,phy-init-sequence: PHY configuration sequence. val, reg pairs
> >  				terminate with -1
> >  
> > +- qcom,phy-num:	Select number of pyco-phy to use, can be one of
> > +				0 - PHY one, default
> > +				1 - Second PHY
> > +				Some platforms may have configuration to allow USB
> > +				controller work with any of the two HSPHYs present.
> > +
> 
> Only one can be used at a time?

Yes only one of them. Selected at driver init time. 

> 
> [...]
> 
> > @@ -1395,6 +1412,9 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg)
> >  	if (!of_property_read_u32(node, "qcom,otg-control", &val))
> >  		pdata->otg_control = val;
> >  
> > +	if (!of_property_read_u32(node, "qcom,phy-num", &val))
> > +		motg->phy_number = val;
> 
> No sanity checking? If not all of your tests on the value of
> motg->phy_number are the same form, you may get undepected results...


All checks are the same, but will add explicit check.

Thanks, 
Ivan 

> 
> Mark.


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux