On Wed, Apr 27, 2016 at 04:23:34PM -0400, Akshay Bhat wrote: > Document the ddc-i2c-bus property used by imx-ldb driver to read EDID > information via I2C interface. > > Signed-off-by: Akshay Bhat <akshay.bhat@xxxxxxxxxxx> > --- > > v3: > Newly added. > > Documentation/devicetree/bindings/display/imx/ldb.txt | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/Documentation/devicetree/bindings/display/imx/ldb.txt b/Documentation/devicetree/bindings/display/imx/ldb.txt > index 0a175d9..a407462 100644 > --- a/Documentation/devicetree/bindings/display/imx/ldb.txt > +++ b/Documentation/devicetree/bindings/display/imx/ldb.txt > @@ -62,6 +62,7 @@ Required properties: > display-timings are used instead. > > Optional properties (required if display-timings are used): The required part doesn't make sense if you add this, but... > + - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing Really, this should be part of a connector node since i2c goes from the i2c controller to a connector and is not part of the display controller. > - display-timings : A node that describes the display timings as defined in > Documentation/devicetree/bindings/display/display-timing.txt. > - fsl,data-mapping : should be "spwg" or "jeida" > -- > 2.8.1 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
