Hi Olivier Am 28.04.2016 um 14:52 schrieb Olivier Blin: > Stephen Warren <swarren@xxxxxxxxxxxxx> writes: > >> On 02/04/2016 12:36 AM, Lubomir Rintel wrote: >>> The hub and the ethernet in its port 1 are hardwired on the board. >>> >>> Compared to the adapters that can be plugged into the USB ports, this >>> one has no serial EEPROM to store its MAC. Nevertheless, the Raspberry Pi >>> has the MAC address for this adapter in its ROM, accessible from its >>> firmware. >>> >>> U-Boot can read out the address and set the local-mac-address property of the >>> node with "ethernet" alias. Let's add the node so that U-Boot can do its >>> business. >>> >>> Model B rev2 and Model B+ entries were verified by me, the hierarchy and >>> pid/vid pair for the Version 2 was provided by Olivier Blin. Original >>> Model B is a blind short, though very likely correct. >> The series, >> Tested-by: Stephen Warren <swarren@xxxxxxxxxxxxx> >> >> A few nits though... > [...] > > Is this still being queued in some tree? > Or does it need more fixes and a resubmit? Yes, a V3 should address the comments from Peter and Stephen. Regards Stefan > > Without this, Raspberry Pi devices boot with a random MAC address. > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
