On Thu, 28 Apr 2016 10:47:24 +0200
Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx> wrote:
> > +static int at91_ebi_probe(struct platform_device *pdev)
> > +{
> > + const struct of_device_id *match;
> > + struct device_node *child;
> > + struct at91_ebi *ebi;
> > + struct clk *clk;
> > + int ret;
> > +
> > + match = of_match_device(at91_ebi_id_table, &pdev->dev);
> > + if (!match || !match->data)
> > + return -EINVAL;
> > +
> > + ebi = devm_kzalloc(&pdev->dev, sizeof(*ebi), GFP_KERNEL);
> > + if (!ebi)
> > + return -ENOMEM;
> > +
> > + ebi->caps = match->data;
> > + ebi->dev = &pdev->dev;
> > +
> > + clk = devm_clk_get(&pdev->dev, NULL);
> > + if (IS_ERR(clk))
> > + return PTR_ERR(clk);
> > +
> > + ebi->clk = clk;
> > +
> > + ebi->smc = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
> > + "atmel,smc");
> > + if (IS_ERR(ebi->smc))
> > + return PTR_ERR(ebi->smc);
> > +
> > + /*
> > + * The sama5d3 does not provide an EBICSA register and thus does need
> > + * to access the matrix registers.
> > + */
> > + if (ebi->caps->ebi_csa) {
> > + ebi->matrix =
> > + syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
> > + "atmel,matrix");
> > + if (IS_ERR(ebi->matrix))
> > + return PTR_ERR(ebi->matrix);
> > +
> > + ebi->ebi_csa = regmap_field_alloc(ebi->matrix,
> > + *ebi->caps->ebi_csa);
> > + if (IS_ERR(ebi->ebi_csa))
> > + return PTR_ERR(ebi->ebi_csa);
> > + }
> > +
> > + ret = ebi->caps->init(ebi);
> > + if (ret)
> > + return ret;
> > +
> > + for_each_child_of_node(pdev->dev.of_node, child) {
> > + ret = at91_ebi_dev_setup(ebi, child);
> > + if (ret)
> > + return ret;
>
> I'm not sure about breaking out of the loop here, if
> at91_ebi_dev_setup() for a device fail then the remaining devices
> won't be probed. If you add a bad config for a fpga on CS1, you can
> prevent your NAND on CS2 to be probed.
Fair enough, I'll continue iterating even if an error occurs.
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
