On 22/04/16 12:22, Mark Rutland wrote: [snip] >>>> I am not sure if it will be popular to add Tegra specific clock names >>>> to the GIC DT docs. However, in that case, then possibly the only >>>> alternative is to move the Tegra AGIC driver into its own file and >>>> expose the GIC APIs for it to use. Then we could add our own DT doc >>>> for the Tegra AGIC as well (based upon the ARM GIC). >>> >>> The clock-names don't seem right to me, as they sound like provide names >>> or global clock line names rather than consumer-side names ("clk" and >>> "apb_pclk"). >> >> Yes that would be fine with me. > > Ok; if we model the apb_pclk as owned by the AXI switch (which it is), > then there's no change for the GIC binding, short of the additional > compatible string as an extension of "arm,gic-400", as we already model > that clock in the GIC-400 binding. I have been re-working this based upon the feedback received. In the GIC driver we have the following definitions ... IRQCHIP_DECLARE(gic_400, "arm,gic-400", gic_of_init); IRQCHIP_DECLARE(arm11mp_gic, "arm,arm11mp-gic", gic_of_init); IRQCHIP_DECLARE(arm1176jzf_dc_gic, "arm,arm1176jzf-devchip-gic", gic_of_init); IRQCHIP_DECLARE(cortex_a15_gic, "arm,cortex-a15-gic", gic_of_init); IRQCHIP_DECLARE(cortex_a9_gic, "arm,cortex-a9-gic", gic_of_init); IRQCHIP_DECLARE(cortex_a7_gic, "arm,cortex-a7-gic", gic_of_init); IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init); IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init); IRQCHIP_DECLARE(pl390, "arm,pl390", gic_of_init); If I have something like the following in my dts ... agic: interrupt-controller@702f9000 { compatible = "nvidia,tegra210-agic", "arm,gic-400"; ... }; The problem with this is that it tries to register the interrupt controller early during of_irq_init() before the platform driver has chance to initialise it. To avoid this I got rid of the "nvidia,tegra210-agic" string and added the following for the platform driver ... static const struct of_device_id gic_match[] = { { .compatible = "arm,arm11mp-gic-pm", .data = &arm11mp_gic_data }, { .compatible = "arm,cortex-a15-gic-pm", .data = &cortexa15_gic_data }, { .compatible = "arm,cortex-a9-gic-pm", .data = &cortexa9_gic_data }, { .compatible = "arm,gic400-pm", .data = &gic400_data }, { .compatible = "arm,pl390-pm", .data = &pl390_data }, {}, }; It is not ideal as now we have a *-pm variant of each compatible string :-( Another option would be to add some code in gic_of_init() to check for the presence of a "clocks" node in the DT binding and bail out of the early initialisation if found but may be that is a bit of a hack. Mark, what are your thoughts on this? Cheers Jon -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html