Add a start_signal_voltage_switch() operation to support enabling of UHS modes. Signed-off-by: Lars Persson <larper@xxxxxxxx> --- drivers/mmc/host/usdhi6rol0.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/mmc/host/usdhi6rol0.c b/drivers/mmc/host/usdhi6rol0.c index e9c8dfa..743e200 100644 --- a/drivers/mmc/host/usdhi6rol0.c +++ b/drivers/mmc/host/usdhi6rol0.c @@ -1147,12 +1147,22 @@ static void usdhi6_enable_sdio_irq(struct mmc_host *mmc, int enable) } } +static int usdhi6_sig_volt_switch(struct mmc_host *mmc, struct mmc_ios *ios) +{ + int ret; + + ret = mmc_regulator_set_vqmmc(mmc, ios); + + return ret; +} + static struct mmc_host_ops usdhi6_ops = { .request = usdhi6_request, .set_ios = usdhi6_set_ios, .get_cd = usdhi6_get_cd, .get_ro = usdhi6_get_ro, .enable_sdio_irq = usdhi6_enable_sdio_irq, + .start_signal_voltage_switch = usdhi6_sig_volt_switch, }; /* State machine handlers */ -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html