This patchset does the following things
- Adds pmusysreg device node to exynos5.dtsi file
- Adds watchdog DT nodes to Exynos5250 and 5420
- Uses syscon regmap interface to configure pmu registers
to mask/unmask enable/disable of watchdog.
This patch set is rebased on Kgene's for-next branch and tested on SMDK5420
changes since V8:
- modified the patch description for the below patch
"watchdog: s3c2410_wdt: use syscon regmap interface to configure pmu register"
- removed MODULE_ALIAS in watchdog driver
- changed dev_warn to dev_err in one failure case handling (suggested by Guenter Roeck <linux@xxxxxxxxxxxx>)
- renamed variable name from pmu_config to drv_data
- changed the compatible field description in documentation file
(suggested by Tomasz Figa <t.figa@xxxxxxxxxxx>)
changes since V7:
- re-ordered the patches in the series
- moved pmu_config_s3c2410 structure out of ifdef CONFIG_OF
and limited only this structure to platform match table
- renamed structure name from s3c_wdt_driver_ids to s3c2410_wdt_ids
- removed exynos variants from platform match table
(suggested by Tomasz Figa <t.figa@xxxxxxxxxxx>)
changes since V6:
- added SoC-specific compatible value to syscon node and documented it
- given more patch description for below patch
ARM: dts: update watchdog device nodes for Exynos5250 and Exynos5420
- added platform_device_id array for watchdog devices
- selected MFD_SYSCON in Kconfig entry for watchdog
Changes since V5:
- removed status property in DT nodes
- changed the return type for the function s3c2410wdt_mask_and_disable_reset()
and handled error cases
- Handled to get driver data in non-DT cases
- Addressed comments given by Tomasz Figa <t.figa@xxxxxxxxxxx>
Changes since V4:
- changed the node name from pmusysreg to syscon and node label from pmu_sys_reg to pmu_syscon
- changed the property name from samsung,pmusysreg to samsung,syscon-phandle
- used regmap_update_bits instead of remap_read/regmap_write
- Addressed other comments given by Tomasz Figa <t.figa@xxxxxxxxxxx>
Changes since V3:
- changed the compatible strings for watchdog node
- splitted up adding pmusysreg node and made it separate patch
- Addressed comments given by Sachin Kamat <sachin.kamat@xxxxxxxxxx>
Changes since V2:
- used syscon regmap interface to configure pmu registers in WDT driver
(suggested by Tomasz Figa <t.figa@xxxxxxxxxxx>)
Changes since V1:
- Added new compatible string for Exynos5 SoCs
- Introduced quirk mechanism to program PMU registers
- Addressed comments given by Tomasz Figa <t.figa@xxxxxxxxxxx>
Leela Krishna Amudala (3):
ARM: dts: Add pmu sysreg node to exynos5250 and exynos5420 dtsi files
watchdog: s3c2410_wdt: use syscon regmap interface to configure pmu
register
ARM: dts: update watchdog device nodes for Exynos5250 and Exynos5420
.../devicetree/bindings/arm/samsung/pmu.txt | 16 +++
.../devicetree/bindings/watchdog/samsung-wdt.txt | 21 ++-
arch/arm/boot/dts/exynos5.dtsi | 7 -
arch/arm/boot/dts/exynos5250.dtsi | 11 +-
arch/arm/boot/dts/exynos5420.dtsi | 14 ++
drivers/watchdog/Kconfig | 1 +
drivers/watchdog/s3c2410_wdt.c | 145 ++++++++++++++++++--
7 files changed, 197 insertions(+), 18 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/samsung/pmu.txt
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
