Hi Sylvain, On 26.04.2016 15:26, Sylvain Lemieux wrote: > Hi Vladimir, > > On Tue, 2016-04-26 at 00:02 +0300, Vladimir Zapolskiy wrote: >> The change adds separate device nodes for SIC1 and SIC2 interrupt >> controllers and reparents all defined SIC1 and SIC2 interrupt >> producers to the correspondent interrupt controller, this is needed to >> perform switching to a new LPC32xx MIC/SIC interrupt controller driver. >> >> Signed-off-by: Vladimir Zapolskiy <vz@xxxxxxxxx> >> --- >> Changes from v2 to v3: >> * fix io region size for MIC controller after moving SIC1/SIC2 >> controllers out, >> * move MIC 'reg' property up to follow 'compatible' property. >> >> Changes from v1 to v2: >> * squashed two step change in lpc32xx.dtsi - new irqchip driver can be >> used (i.e. board boots with access to userspace) with old DTS file, >> so there is no need to fix DTS firstly and then switch to a new driver, >> * removed "interrupt-controller-name" and "wakeup-sources" properties >> from all interrupt controllers, >> * removed outdated comment. >> >> arch/arm/boot/dts/lpc32xx.dtsi | 60 +++++++++++++++++++++++++++++------------- >> 1 file changed, 42 insertions(+), 18 deletions(-) >> > Please use capital letter for the word ARM in the patch title. right, I'll change it on application, thank you for review. > Acked-by: Sylvain Lemieux <slemieux.tyco@xxxxxxxxx> > -- With best wishes, Vladimir -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
