Re: [PATCH 1/3] iio: mxs-lradc: Add regulators for current sources

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




[CCing Mark and Liam again]

On 22.04.2016 19:00, Ksenija Stanojević wrote:
On Fri, Apr 22, 2016 at 5:50 PM, Marek Vasut <marex@xxxxxxx> wrote:
On 04/22/2016 03:52 PM, Harald Geyer wrote:
The hardware has two current sources ISRC0 and ISRC1 to allow measuring resistors without additional circuitry. This commit makes them available
as regulators.

Tested on an imx233-olinuxino board.

Signed-off-by: Harald Geyer <harald@xxxxxxxxx>
---
The current regulator API doesn't fit this type of device very well: Typically consumers will want to set a defined current, ie. min_uA == max_uA, but they can't without help from configuration data, because the valid values aren't reported by the API for current regulators. I have been thinking about extending the API, but currently AFAIK no such consumers exist and most
users, like myself, will force the regulator to a defined value in
devicetree anyway.

I am tempted to block this patch and ask you to properly split the
mxs-lradc driver into MFD with touchscreen and IIO part and only then
add the regulator bits. The lradc is becoming a katamari of ad-hoc
misplaced functionality.

I know. However I'm afraid working this into a proper MFD is above my skills
and I don't feel responsible for the status quo either.

I almost finished, I already split the driver into MFD, sorry for the delay.

Wow, looks like I have a lot of luck today.

Can this wait a little bit?

Sure. I now have a working kernel for my purposes, so no hurry on my part. CC my when you submit your code or maybe even pick my patch into your series,
if you feel like it.

Thanks,
Harald

Thanks,
Ksenija

 .../bindings/staging/iio/adc/mxs-lradc.txt         |  29 ++++
 drivers/iio/adc/Kconfig                            |   1 +
drivers/iio/adc/mxs-lradc.c | 152 +++++++++++++++++++++
 3 files changed, 182 insertions(+)

diff --git a/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt b/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt
index 555fb11..983952c 100644
--- a/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt +++ b/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt
@@ -19,6 +19,15 @@ Optional properties:
- fsl,settling: delay between plate switch to next sample. Allowed value is
                 1 ... 2047. It counts at 2 kHz and its default is
                 10 (= 5 ms)
+- ISRC0: A node describing the regulator of internal current source 0 +- ISRC1: A node describing the regulator of internal current source 1
+
+Required properties for the ISRCx sub-nodes:
+- regulator-max-microamp: See standard regulator binding documentation. + Valid values are from 0 to 300 in steps of 20.
+
+Optional properties for the ISRCx sub-nodes:
+Any standard regulator properties that apply to current regulators.

 Example for i.MX23 SoC:

@@ -31,6 +40,16 @@ Example for i.MX23 SoC:
              fsl,ave-ctrl = <4>;
              fsl,ave-delay = <2>;
              fsl,settling = <10>;
+
+             isrc_lradc0: ISRC0 {
+                     regulator-max-microamp = <300>;
+             };
+
+             isrc_lradc1: ISRC1 {
+                     regulator-max-microamp = <120>;
+                     regulator-min-microamp = <120>;
+                     regulator-always-on;
+             };
      };

 Example for i.MX28 SoC:
@@ -44,4 +63,14 @@ Example for i.MX28 SoC:
              fsl,ave-ctrl = <4>;
              fsl,ave-delay = <2>;
              fsl,settling = <10>;
+
+             isrc_lradc0: ISRC0 {
+                     regulator-max-microamp = <300>;
+             };
+
+             isrc_lradc6: ISRC1 {
+                     regulator-max-microamp = <120>;
+                     regulator-min-microamp = <120>;
+                     regulator-always-on;
+             };
      };
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 5937030..1968d1c 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -319,6 +319,7 @@ config MXS_LRADC
         tristate "Freescale i.MX23/i.MX28 LRADC"
         depends on (ARCH_MXS || COMPILE_TEST) && HAS_IOMEM
         depends on INPUT
+        depends on REGULATOR
         select STMP_DEVICE
         select IIO_BUFFER
         select IIO_TRIGGERED_BUFFER
diff --git a/drivers/iio/adc/mxs-lradc.c b/drivers/iio/adc/mxs-lradc.c
index 33051b8..f22f339 100644
--- a/drivers/iio/adc/mxs-lradc.c
+++ b/drivers/iio/adc/mxs-lradc.c
@@ -40,6 +40,10 @@
 #include <linux/iio/triggered_buffer.h>
 #include <linux/iio/sysfs.h>

+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+
 #define DRIVER_NAME          "mxs-lradc"

 #define LRADC_MAX_DELAY_CHANS        4
@@ -261,6 +265,9 @@ struct mxs_lradc {
      unsigned                over_sample_delay;
      /* time in clocks to wait after the plates where switched */
      unsigned                settling_delay;
+
+     struct regulator_desc isrc0;
+     struct regulator_desc isrc1;
 };

 #define      LRADC_CTRL0                             0x00
@@ -305,6 +312,11 @@ struct mxs_lradc {
 #define      LRADC_CTRL2                             0x20
 #define      LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET        24
 #define      LRADC_CTRL2_TEMPSENSE_PWD               BIT(15)
+#define      LRADC_CTRL2_TEMP_SENSOR_IENABLE1        BIT(9)
+#define      LRADC_CTRL2_TEMP_SENSOR_IENABLE0        BIT(8)
+#define      LRADC_CTRL2_TEMP_ISRC1_OFFSET           4
+#define      LRADC_CTRL2_TEMP_ISRC0_OFFSET           0
+#define      LRADC_CTRL2_TEMP_ISRC_MASK              0x0f

 #define      LRADC_STATUS                            0x40
 #define      LRADC_STATUS_TOUCH_DETECT_RAW           BIT(0)
@@ -1383,6 +1395,109 @@ static const struct iio_buffer_setup_ops mxs_lradc_buffer_ops = {
      .validate_scan_mask = &mxs_lradc_validate_scan_mask,
 };

+static int mxs_lradc_regulator_is_enabled(struct regulator_dev *dev)
+{
+     struct mxs_lradc *lradc = rdev_get_drvdata(dev);
+     int reg = readl(lradc->base + LRADC_CTRL2);
+
+     if (dev->desc == &lradc->isrc0)
+             return reg & LRADC_CTRL2_TEMP_SENSOR_IENABLE0;
+     else if (dev->desc == &lradc->isrc1)
+             return reg & LRADC_CTRL2_TEMP_SENSOR_IENABLE1;
+
+     /* This should never happen */
+     return -ENODEV;
+}
+
+#define LRADC_REGVALUE2uA(regval, offset) \
+     (20 * ((regval >> offset) & LRADC_CTRL2_TEMP_ISRC_MASK))
+
+static int mxs_lradc_regulator_get_current_limit(struct regulator_dev *dev)
+{
+     struct mxs_lradc *lradc = rdev_get_drvdata(dev);
+     int reg = readl(lradc->base + LRADC_CTRL2);
+
+     if (dev->desc == &lradc->isrc0)
+ return LRADC_REGVALUE2uA(reg, LRADC_CTRL2_TEMP_ISRC0_OFFSET);
+     else if (dev->desc == &lradc->isrc1)
+ return LRADC_REGVALUE2uA(reg, LRADC_CTRL2_TEMP_ISRC1_OFFSET);
+
+     /* This should never happen */
+     return -ENODEV;
+}
+
+static int mxs_lradc_regulator_enable(struct regulator_dev *dev)
+{
+     struct mxs_lradc *lradc = rdev_get_drvdata(dev);
+
+     if (dev->desc == &lradc->isrc0)
+ mxs_lradc_reg_set(lradc, LRADC_CTRL2_TEMP_SENSOR_IENABLE0,
+                               LRADC_CTRL2);
+     else if (dev->desc == &lradc->isrc1)
+ mxs_lradc_reg_set(lradc, LRADC_CTRL2_TEMP_SENSOR_IENABLE1,
+                               LRADC_CTRL2);
+     else
+             /* This should never happen */
+             return -ENODEV;
+
+     return 0;
+}
+
+static int mxs_lradc_regulator_disable(struct regulator_dev *dev)
+{
+     struct mxs_lradc *lradc = rdev_get_drvdata(dev);
+
+     if (dev->desc == &lradc->isrc0)
+ mxs_lradc_reg_clear(lradc, LRADC_CTRL2_TEMP_SENSOR_IENABLE0,
+                                 LRADC_CTRL2);
+     else if (dev->desc == &lradc->isrc1)
+ mxs_lradc_reg_clear(lradc, LRADC_CTRL2_TEMP_SENSOR_IENABLE1,
+                                 LRADC_CTRL2);
+     else
+             /* This should never happen */
+             return -ENODEV;
+
+     return 0;
+}
+
+static int mxs_lradc_regulator_set_current_limit(struct regulator_dev *dev, + int min_uA, int max_uA)
+{
+     struct mxs_lradc *lradc = rdev_get_drvdata(dev);
+     int offset, value;
+
+     if (dev->desc == &lradc->isrc0)
+             offset = LRADC_CTRL2_TEMP_ISRC0_OFFSET;
+     else if (dev->desc == &lradc->isrc1)
+             offset = LRADC_CTRL2_TEMP_ISRC1_OFFSET;
+     else
+             /* This should never happen */
+             return -ENODEV;
+
+     value = min_uA / 20;
+     if (min_uA % 20)
+             value++;
+     if (value * 20 > max_uA)
+             return -EINVAL;
+     if (value & ~LRADC_CTRL2_TEMP_ISRC_MASK)
+             /* This should never happen */
+             return -EPERM;
+
+ mxs_lradc_reg_clear(lradc, LRADC_CTRL2_TEMP_ISRC_MASK << offset,
+                         LRADC_CTRL2);
+     mxs_lradc_reg_set(lradc, value << offset, LRADC_CTRL2);
+
+     return 0;
+}
+
+static struct regulator_ops mxs_lradc_regulator_current_ops = {
+     .enable = mxs_lradc_regulator_enable,
+     .is_enabled = mxs_lradc_regulator_is_enabled,
+     .disable = mxs_lradc_regulator_disable,
+     .get_current_limit = mxs_lradc_regulator_get_current_limit,
+     .set_current_limit = mxs_lradc_regulator_set_current_limit,
+};
+
 /*
  * Driver initialization
  */
@@ -1519,6 +1634,10 @@ static void mxs_lradc_hw_stop(struct mxs_lradc *lradc)

      for (i = 0; i < LRADC_MAX_DELAY_CHANS; i++)
              mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(i));
+
+     mxs_lradc_reg_clear(lradc, LRADC_CTRL2_TEMP_SENSOR_IENABLE0 |
+ LRADC_CTRL2_TEMP_SENSOR_IENABLE1,
+                         LRADC_CTRL2);
 }

 static const struct of_device_id mxs_lradc_dt_ids[] = {
@@ -1592,6 +1711,32 @@ static int mxs_lradc_probe_touchscreen(struct mxs_lradc *lradc,
      return 0;
 }

+static void mxs_lradc_reg_helper(struct device_node *np, const char *name,
+                              struct regulator_config *conf,
+                              struct regulator_desc *desc)
+{
+     struct regulator_dev *ret;
+
+     conf->of_node = of_get_child_by_name(np, name);
+     if (!conf->of_node)
+             return;
+
+     desc->name = name;
+     desc->owner = THIS_MODULE;
+     desc->type = REGULATOR_CURRENT;
+     desc->ops = &mxs_lradc_regulator_current_ops;
+
+ conf->init_data = of_get_regulator_init_data(conf->dev, conf->of_node,
+                                                  desc);
+     ret = devm_regulator_register(conf->dev, desc, conf);
+     if (IS_ERR(ret))
+             /* Just pretend the regulator isn't there */
+ dev_err(conf->dev, "Failed to register regulator %s: %ld\n",
+                     desc->name, PTR_ERR(ret));
+
+     of_node_put(conf->of_node);
+}
+
 static int mxs_lradc_probe(struct platform_device *pdev)
 {
      const struct of_device_id *of_id =
@@ -1603,6 +1748,7 @@ static int mxs_lradc_probe(struct platform_device *pdev)
      struct mxs_lradc *lradc;
      struct iio_dev *iio;
      struct resource *iores;
+     struct regulator_config regconf;
      int ret = 0, touch_ret;
      int i, s;
      u64 scale_uv;
@@ -1727,6 +1873,12 @@ static int mxs_lradc_probe(struct platform_device *pdev)
              goto err_ts;
      }

+     /* Setup regulator devices for current source. */
+     regconf.dev = dev;
+     regconf.driver_data = lradc;
+     mxs_lradc_reg_helper(node, "ISRC0", &regconf, &lradc->isrc0);
+     mxs_lradc_reg_helper(node, "ISRC1", &regconf, &lradc->isrc1);
+
      return 0;

 err_ts:



--
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
If you want to support my work:
see http://friends.ccbib.org/harald/supporting/
or donate via peercoin to P98LRdhit3gZbHDBe7ta5jtXrMJUms4p7w
or bitcoin 1FUtd8T9jRN1rFz63vZz7s2fDtB6d6A7aS
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux