Hello,
The following small series adds support for the Marvell Armada 7K/8K
AHCI controller. This controller is a standard AHCI controller, so not
much is needed, except that it uses a non-default port offset and
length. Due to this, some preparatory patches are used to make it
possible to override the default port offset/length used by the AHCI
core.
Thanks!
Thomas
Thomas Petazzoni (5):
ata: ahci: add support for non-standard port offset/length
ata: acard-ahci: use the new port_{offset,length} members
ata: ahci_ceva: use the new port_{offset,length} members
ata: ahci_mvebu: add support for Armada 8K
dt-bindings: ata: add compatible string for Armada 8K to ahci-platform
Documentation/devicetree/bindings/ata/ahci-platform.txt | 1 +
drivers/ata/acard-ahci.c | 3 ++-
drivers/ata/ahci.c | 5 +++--
drivers/ata/ahci.h | 7 ++++++-
drivers/ata/ahci_ceva.c | 5 ++---
drivers/ata/ahci_mvebu.c | 5 +++++
drivers/ata/libahci_platform.c | 7 ++++++-
7 files changed, 25 insertions(+), 8 deletions(-)
--
2.6.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
