On 21 April 2016 at 15:55, Lars Persson <lars.persson@xxxxxxxx> wrote: > Add a start_signal_voltage_switch() operation to support enabling of > UHS modes. > > Signed-off-by: Lars Persson <larper@xxxxxxxx> > --- > drivers/mmc/host/usdhi6rol0.c | 23 ++++++++++++++++++++++- > 1 file changed, 22 insertions(+), 1 deletion(-) > > diff --git a/drivers/mmc/host/usdhi6rol0.c b/drivers/mmc/host/usdhi6rol0.c > index 807c06e..28fe5c7 100644 > --- a/drivers/mmc/host/usdhi6rol0.c > +++ b/drivers/mmc/host/usdhi6rol0.c > @@ -21,6 +21,7 @@ > #include <linux/mmc/sd.h> > #include <linux/mmc/sdio.h> > #include <linux/module.h> > +#include <linux/of.h> > #include <linux/pagemap.h> > #include <linux/platform_device.h> > #include <linux/scatterlist.h> > @@ -1147,12 +1148,22 @@ static void usdhi6_enable_sdio_irq(struct mmc_host *mmc, int enable) > } > } > > +static int usdhi6_sig_volt_switch(struct mmc_host *mmc, struct mmc_ios *ios) > +{ > + int ret; > + > + ret = mmc_regulator_set_vqmmc(mmc, ios); > + > + return ret; > +} > + > static struct mmc_host_ops usdhi6_ops = { > .request = usdhi6_request, > .set_ios = usdhi6_set_ios, > .get_cd = usdhi6_get_cd, > .get_ro = usdhi6_get_ro, > .enable_sdio_irq = usdhi6_enable_sdio_irq, > + .start_signal_voltage_switch = usdhi6_sig_volt_switch, > }; > > /* State machine handlers */ > @@ -1785,7 +1796,17 @@ static int usdhi6_probe(struct platform_device *pdev) > > mmc->ops = &usdhi6_ops; > mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED | > - MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_DDR50 | MMC_CAP_SDIO_IRQ; Oh, this was weird. The driver already claimed to support UHS mode, but when in fact it didn't. :-) Perhaps that change deserves its own fixup patch? > + MMC_CAP_SDIO_IRQ; > + > + /* > + * A vqmmc regulator with a 1.8V mode is mandatory to support > + * UHS modes. > + */ > + if (!of_property_read_bool(dev->of_node, "no-1-8-v") && No, please don't use this binding. Instead there is already bindings for MMC_CAP_UHS_DDR50 and MMC_CAP_UHS_SDR50, please use them instead. > + !IS_ERR(mmc->supply.vqmmc)) { > + mmc->caps |= MMC_CAP_UHS_DDR50 | MMC_CAP_UHS_SDR50; > + } > + > /* Set .max_segs to some random number. Feel free to adjust. */ > mmc->max_segs = 32; > mmc->max_blk_size = 512; > -- > 2.1.4 > Kind regards Uffe -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html