This patch series migrated all the pin control information for the Nomadik pin controller as used on the various Ux500 boards from the board file and into the device tree. After this only the ABx500 pin configuration remains in the board file. (Will be addressed separately.) This uses the existing device tree bindings. No new bindings are added. Linus Walleij (21): ARM: ux500: move UART pin control to the device tree ARM: ux500: move I2C pin control to the device tree ARM: ux500: move MMC/SD/SDIO pin control to the device tree ARM: ux500: move MSP pin control to the device tree ARM: ux500: move GPIO217/218 config to device tree ARM: ux500: move MUSB pin config to device tree ARM: ux500: move SPI pin config to device tree ARM: ux500: create MCDE node to collect resources ARM: ux500: move MCDE pin config to device tree ARM: ux500: move SKE pin config to device tree ARM: ux500: drop STM pinmap settings ARM: ux500: move old HREF ipgpio to the device tree ARM: ux500: move GPIO key configuration to device tree ARM: ux500: move the WLAN GPIO pin setup to the device tree ARM: ux500: move the HREFv60plus IPGPIO pins to device tree ARM: ux500: move final HREFv60 LCD pins to device tree ARM: ux500: move HREFv60plus pin configs to device tree ARM: ux500: move snowball ethernet config to device tree ARM: ux500: convert Snowball SPI pin reference ARM: ux500: move snowball LED pin control to device tree ARM: ux500: move snowball pin configs to device tree arch/arm/boot/dts/ste-dbx5x0.dtsi | 17 + arch/arm/boot/dts/ste-href-family-pinctrl.dtsi | 745 +++++++++++++++++++++++ arch/arm/boot/dts/ste-href-stuib.dtsi | 41 ++ arch/arm/boot/dts/ste-href-tvk1281618.dtsi | 51 ++ arch/arm/boot/dts/ste-href.dtsi | 78 ++- arch/arm/boot/dts/ste-hrefprev60.dtsi | 65 ++ arch/arm/boot/dts/ste-hrefv60plus.dtsi | 217 ++++++- arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi | 80 +++ arch/arm/boot/dts/ste-snowball.dts | 225 +++++++ arch/arm/mach-ux500/board-mop500-pins.c | 781 ------------------------- 10 files changed, 1503 insertions(+), 797 deletions(-) create mode 100644 arch/arm/boot/dts/ste-href-family-pinctrl.dtsi -- 1.8.3.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
