Port mode offset for each dsaf port is different. The current code is not so readability. This patch adds configuration named port-mode-offset to make the code more simple and readability. If port-mode-offset doesn't exist, default value 0 will be used. Signed-off-by: Daode Huang <huangdaode@xxxxxxxxxxxxx> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@xxxxxxxxxx> --- .../devicetree/bindings/net/hisilicon-hns-dsaf.txt | 3 +- drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c | 10 +++++ drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.h | 1 + drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c | 44 ++++++++++------------ 4 files changed, 32 insertions(+), 26 deletions(-) diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt index 2afc3fa..5ccd4f0 100644 --- a/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt +++ b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt @@ -45,7 +45,8 @@ Required properties: cpld-syscon. - port-rst-offset: is offset of reset field for each port in dsaf. Its value depends on the hardware user manual. - +- port-mode-offset: is offset of port mode field for each port in dsaf. Its + value depends on the hardware user manual. [1] Documentation/devicetree/bindings/net/phy.txt diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c index 52d757d..1c8fdd3 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c @@ -665,6 +665,7 @@ static int hns_mac_get_info(struct hns_mac_cb *mac_cb) mac_cb->max_frm = MAC_DEFAULT_MTU; mac_cb->tx_pause_frm_time = MAC_DEFAULT_PAUSE_TIME; mac_cb->port_rst_off = mac_cb->mac_id; + mac_cb->port_mode_off = 0; /* if the dsaf node doesn't contain a port subnode, get phy-handle * from dsaf node @@ -703,6 +704,15 @@ static int hns_mac_get_info(struct hns_mac_cb *mac_cb) mac_cb->mac_id); } + ret = fwnode_property_read_u32(mac_cb->fw_port, + "port-mode-offset", + &mac_cb->port_mode_off); + if (ret) { + dev_dbg(mac_cb->dev, + "mac%d port-mode-offset not found, use default value.\n", + mac_cb->mac_id); + } + syscon = syscon_node_to_regmap( of_parse_phandle(to_of_node(mac_cb->fw_port), "cpld-syscon", 0)); diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.h b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.h index 7be7104..97ce9a7 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.h +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.h @@ -319,6 +319,7 @@ struct hns_mac_cb { struct regmap *cpld_ctrl; u32 cpld_ctrl_reg; u32 port_rst_off; + u32 port_mode_off; struct mac_entry_idx addr_entry_idx[DSAF_MAX_VM_NUM]; u8 sfp_prsnt; u8 cpld_led_value; diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c index e549a11..a837bb9 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c @@ -265,37 +265,31 @@ phy_interface_t hns_mac_get_phy_if(struct hns_mac_cb *mac_cb) { u32 mode; u32 reg; - u32 shift; - u32 phy_offset; bool is_ver1 = AE_IS_VER1(mac_cb->dsaf_dev->dsaf_ver); int mac_id = mac_cb->mac_id; - phy_interface_t phy_if = PHY_INTERFACE_MODE_NA; + phy_interface_t phy_if; - if (is_ver1 && HNS_DSAF_IS_DEBUG(mac_cb->dsaf_dev)) { - phy_if = PHY_INTERFACE_MODE_SGMII; - } else if (mac_id >= 0 && mac_id <= 3 && - !HNS_DSAF_IS_DEBUG(mac_cb->dsaf_dev)) { - reg = is_ver1 ? HNS_MAC_HILINK4_REG : HNS_MAC_HILINK4V2_REG; - mode = dsaf_read_sub(mac_cb->dsaf_dev, reg); - /* mac_id 0, 1, 2, 3 ---> hilink4 lane 0, 1, 2, 3 */ - shift = is_ver1 ? 0 : mac_id; - if (dsaf_get_bit(mode, shift)) - phy_if = PHY_INTERFACE_MODE_XGMII; + if (is_ver1) { + if (HNS_DSAF_IS_DEBUG(mac_cb->dsaf_dev)) + return PHY_INTERFACE_MODE_SGMII; + + if (mac_id >= 0 && mac_id <= 3) + reg = HNS_MAC_HILINK4_REG; else - phy_if = PHY_INTERFACE_MODE_SGMII; - } else { - reg = is_ver1 ? HNS_MAC_HILINK3_REG : HNS_MAC_HILINK3V2_REG; - mode = dsaf_read_sub(mac_cb->dsaf_dev, reg); - /* mac_id 4, 5,---> hilink3 lane 2, 3 - * debug port 0(6), 1(7) ---> hilink3 lane 0, 1 - */ - phy_offset = mac_cb->dsaf_dev->reset_offset - 1; - shift = is_ver1 ? 0 : mac_id >= 4 ? mac_id - 2 : phy_offset; - if (dsaf_get_bit(mode, shift)) - phy_if = PHY_INTERFACE_MODE_XGMII; + reg = HNS_MAC_HILINK3_REG; + } else{ + if (!HNS_DSAF_IS_DEBUG(mac_cb->dsaf_dev) && mac_id <= 3) + reg = HNS_MAC_HILINK4V2_REG; else - phy_if = PHY_INTERFACE_MODE_SGMII; + reg = HNS_MAC_HILINK3V2_REG; } + + mode = dsaf_read_sub(mac_cb->dsaf_dev, reg); + if (dsaf_get_bit(mode, mac_cb->port_mode_off)) + phy_if = PHY_INTERFACE_MODE_XGMII; + else + phy_if = PHY_INTERFACE_MODE_SGMII; + return phy_if; } -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html